Návod EGO HTX7500S Plotové nožnice

Návod

56 VOLT LITHIUM-ION SINGLE SIDED HEDGE TRIMMER — HTX7500S 7

EN

This machine can be used with the BHX2000 EGO

Backpack Link. See instructions in BHX2000 EGO

Backpack Link operator’s manual for use and adjustment.

STARTING/STOPPING THE HEDGE TRIMMER

Before operating, remove the blade sheath and hold the

trimmer with both hands, LEFT hand on the rear handle

and RIGHT hand on the front handle. Then check for

balanced footing, upright standing and a proper cutting

distance. Make sure that the cutting blade is not touching

the ground or any other objects.

To Start (Fig. E)

1. Install the battery pack.

2. Squeeze and hold the front trigger with your RIGHT

hand.

3. Move the lock-off lever forward and then press the

rear trigger to start the machine with your LEFT hand.

NOTICE: The hedge trimmer can be started only if the

front and the rear triggers are depressed at the same

time. Both triggers have to be depressed for continuous

operation of the hedge trimmer.

To Stop

Move the machine away from the cutting area and release

either of the triggers to stop it.

WARNING: Always remove the battery pack from

the machine during work breaks and after nishing work.

CHANGING SPEED MODE (FIG. F)

This machine features three speed modes. The speed

mode will change with every press of the speed mode

button.

The speed indicator will display the active speed status:

one light for low speed, two lights for medium speed,

three lights for high speed. The low speed mode provides

better control of the machine and longer operating time

per charge.

NOTICE: The speed mode can be set before the machine

is turned on OR during operation.

When the machine is re-started after a break, the speed

mode will return to the previous speed.

BATTERY-STATUS INDICATOR AND SPEED

INDICATOR (FIG. F)

The battery-status indicator shows the charge level and

the working status of the battery pack, and the speed

indicator shows the working status of the machine as

shown in the chart below. The battery-status indicator

and the speed indicator will illuminate when the machine

is started OR the speed mode button is pressed.

WARNING: To prevent accidental starting that could

cause serious personal injury, always remove the battery

pack from the product when assembling parts, making

adjustments, cleaning, or when not in use.

WARNING: Do not use any attachments or

accessories not recommended by EGO

TM

. The use of

attachments or accessories not recommended can result

in serious personal injury.

Before each use, inspect the entire product for damaged,

missing, or loose parts, such as screws, nuts, bolts, caps,

etc. Tighten securely all fasteners and caps and do not

operate this product until all missing or damaged parts

are replaced.

APPLICATION

The product may be used in rain.

You may use this product for trimming hedges, shrubs,

and bushes with a branch diameter of less than 30 mm.

NOTE: The machine is to be used only for its prescribed

purpose. Any other use is deemed a misuse.

BLADE SHEATH (FIG. B)

Remove/install the blade sheath from/to the cutting device.

INSTALLING/REMOVING THE BATTERY PACK

Use only with battery packs and chargers listed

in Fig.A2.

Charge before rst use.

To Install (Fig. C1)

Align the battery ribs with the mounting slots in the

machine’s battery port and slide the battery pack until it

snaps into position.

To Remove (Fig. C2)

Depress the battery-release button and pull the battery

pack out.

WARNING: Always be aware for the location of your

feet, children, or pets when pressing the battery-release

button. Serious injury could result if the battery pack falls.

NEVER remove the battery pack at a high location.

HOLDING THE HEDGE TRIMMER (Fig. D)

The unit has both front and rear handles. With the blade

directed away from you, hold the unit by both handles.

LEFT hand on the rear handle and RIGHT hand on the

front handle.

WARNING: Always keep both hands on the hedge

trimmer handles. Never hold shrubs with one hand and

operate the hedge trimmer with the other. Failure to heed

this warning may result in serious injury.

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu EGO HTX7500S Plotové nožnice papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať EGO. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu EGO HTX7500S Plotové nožnice v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre EGO Plotové nožnice
Ďalšie príručky od Plotové nožnice

Často kladené otázky o EGO HTX7500S Plotové nožnice

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

EGO HT5110E Plotové nožnice

Návod

EGO PTX5100 Plotové nožnice

Návod

EGO HT2400E Plotové nožnice

Návod

EGO HT2000E Plotové nožnice

Návod

EGO MHSC2002E Plotové nožnice

Návod

EGO HT5100E Plotové nožnice

Návod

EGO HTX7500 Plotové nožnice

Návod

EGO HTX5300-PA Plotové nožnice

Súvisiace kategórie