Návod EGO HTX7500S Plotové nožnice

Návod

56 VOLT LITHIUM-ION SINGLE SIDED HEDGE TRIMMER — HTX7500S 9

EN

COMMUNICATION TECHNOLOGY

For information on our full range of connected products

and services, including connection instructions, please

scan the QR Code below or visit

www.egopowerplus.eu/connect.

USING THE HEDGE TRIMMER

DANGER: If the blade jams on any electrical cord

or line, DO NOT TOUCH THE BLADES! IT CAN BECOME

ELECTRICALLY LIVE AND VERY DANGEROUS. Continue

to hold the hedge trimmer by the insulated handles or lay

it down and away from you in a safe manner. Disconnect

the electrical service to the damaged line or cord before

attempting to free the blades from the line or cord. Failure

to heed this warning will result in serious personal injury

or possible death.

WARNING: If any parts are missing, damaged or

broken, do not operate your trimmer until they have been

replaced. Failure to do so could result in possibly serious

personal injury.

WARNING: To prevent serious personal injury,

always use both the front handle and the rear handle to

hold the hedge trimmer during operation.

WARNING: To prevent serious personal injury,

keep hands away from blades. Do not attempt to remove

cut material or hold material to be cut when the blades

are moving. Make sure that the blades have completely

stopped and the battery pack is removed before clearing

jammed material from blades. Do not grasp the exposed

cutting blades or cutting edges when picking up or

holding the unit.

WARNING: Clear the area to be cut before each use.

Remove all objects, such as cords, lights, wire, or string

which can become entangled in the cutting blade and

create a risk of serious personal injury.

◾ Before starting the hedge trimmer, maintain proper

footing and balance and do not overreach. Do not

operate the trimmer in a tree, on a ladder, from a

rooftop, or any unstable support. Wear safety goggles,

non-skid footwear and rubber gloves. Hold the unit

with both hands, with the cutting blade directed away

from you.

◾ Do not trim too much at a time. This can cause the

blades to bind and slow down, reducing the cutting

efciency.

◾ Do not force the hedge trimmer through heavy

shrubbery. This can cause the blades to bind and slow

down. If the blades slow down, reduce the pace of

your work.

◾ When trimming new growth, use a wide sweeping

action, so that the stems are fed directly into the

cutting blade. Older growth will have thicker stems and

will be trimmed most easily by using a back-and-forth

motion.

◾ Always cut stems or twigs that are less than 30 mm

thick. Use a non-powered hand saw or pruning saw to

trim large stems.

Side Cutting (Fig. G)

When trimming the sides of the hedge, begin at the

bottom and cut upwards. Trim the side of a hedge so

that it will be slightly narrower at the top. This shape will

expose more of the hedge to sunlight, resulting in a more

uniform growth.

Top Cutting (Fig. H)

Use a wide sweeping motion. A slight downward tilt of the

cutting blades in the direction of motion gives the best

cutting results. For a better cutting effect, you may use

the string to guide the hedge level.

MAINTENANCE

WARNING: When servicing, only use identical

replacement parts. Use of any other parts may create a

hazard or cause product damage. To ensure safety and

reliability, all repairs should be performed by a qualied

service technician.

WARNING: To avoid serious personal injury, always

remove the battery pack from the product when cleaning

or performing any maintenance.

CLEANING

◾ Use a soft brush to remove debris from all air intakes

and cutting blade.

◾ To remove pitch and other sticky residue, spray the

blades with resin solvent. Run the motor briey so that

the solvent is evenly distributed, then wipe the surface

with a dry cloth.

WARNING: Avoid using solvents when cleaning

plastic parts. Most plastics are susceptible to damage

from various types of commercial solvents. Use clean

cloth to remove dirt, dust, oil, grease, etc.

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu EGO HTX7500S Plotové nožnice papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať EGO. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu EGO HTX7500S Plotové nožnice v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre EGO Plotové nožnice
Ďalšie príručky od Plotové nožnice

Často kladené otázky o EGO HTX7500S Plotové nožnice

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

EGO HT5110E Plotové nožnice

Návod

EGO PTX5100 Plotové nožnice

Návod

EGO HT2400E Plotové nožnice

Návod

EGO HT2000E Plotové nožnice

Návod

EGO MHSC2002E Plotové nožnice

Návod

EGO HT5100E Plotové nožnice

Návod

EGO HTX7500 Plotové nožnice

Návod

EGO HTX5300-PA Plotové nožnice

Súvisiace kategórie