Návod Hikoki CR 13VBY Chvostová píla

Návod

4

English

○ To maximize cutting effi ciency for the materials you are

using and working conditions, adjust the speed of the

saw blade and the switching to swing cutting.

Cutting

○ Always hold the tool fi rmly with hand on housing as

shown in Fig. 9, Fig. 10 and Fig. 11.

○ Press the base fi rmly against the workpiece.

○ Never apply any unreasonable force to the saw blade

when cutting. Doing so can easily break the blade.

○ Fasten a workpiece fi rmly before operation. (Fig. 9)

○ When cutting metallic materials, use proper machine

oil (turbine oil, etc.). When not using liquid machine oil,

apply grease over the workpiece.

The service life of the saw blade will be drastically

shortened if you don’t use machine oil.

○ Never apply any unreasonable force to the saw blade

when cutting. Also remember to press the base against

the lumber fi rmly.

Sawing curved lines

○ We recommend that you use the BI-METAL blade

mentioned in Table 2 for the saw blade since it is tough

and hardly breaks.

○ Delay the feed speed when cutting the material into

small circular arcs. An unreasonably fast feed may break

the blade.

Plunge cutting (Fig. 10 and 11)

○ Avoid plunge cutting for metallic materials. This can

easily damage the blade.

○ Never pull the switch trigger while the tip of the saw

blade tip is pressed against the material. If you do so, the

blade can easily be damaged when it collides with the

material.

○ Make absolutely sure that you cut slowly while holding

the body fi rmly. If you apply any unreasonable force to

the saw blade during the cutting operation, the blade can

easily be damaged.

12. Cut off guide for cutting pipe (optional accessory)

Please refer to the cut off guide user’s manual for details

on how to use it correctly.

SYMBOLS

WARNING

The following show symbols used for the machine. Be

sure that you understand their meaning before use.

CR13VBY: Reciprocating Saw

To reduce the risk of injury, user must read

instruction manual.

Only for EU countries

Do not dispose of electric tools together with

household waste material!

In observance of European Directive 2012/19/

EU on waste electrical and electronic equipment

and its implementation in accordance with

national law, electric tools that have reached

the end of their life must be collected separately

and returned to an environmentally compatible

recycling facility.

Switching ON

Switching OFF

Straight cutting

Swing cutting

Stroke

Disconnect mains plug from electrical outlet

Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package

contains the accessories listed in the below.

○ Blade (No. 341) .............................................................1

○ Case .............................................................................1

Standard accessories are subject to change without notice.

APPLICATIONS

○ Cutting pipe and angle steel.

○ Cutting various lumbers.

○ Cutting mild steel plates, aluminum plates, and copper

plates.

○ Cutting synthetic resins, such as phenol resin and vinyl

chloride.

For details refer to the section entitled “SELECTION OF

BLADES”.

SPECIFICATIONS

Voltage (by areas) *

(110 V, 115 V, 120 V, 127 V,

220 V, 230 V, 240 V)

Power Input * 1150 W

Capacity

Mild Steel Pipe O.D. 130 mm

Vinyl Chloride

Pipe

O.D. 130 mm

Wood Depth 300 mm

Mild Steel Plate Thickness 19 mm

No-Load Speed 0 – 3000 min

–1

Stroke 32 mm

Weight (without cord) ** 4,6 kg

* Be sure to check the nameplate on product as it is subject

to change by areas.

** According to EPTA-Procedure 01/2014.

NOTE

Due to HiKOKI’s continuing program of research and

development, the specifi cations herein are subject to

change without prior notice.

0000Book̲CR13VBY.indb40000Book̲CR13VBY.indb4 2019/07/2516:28:262019/07/2516:28:26

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Hikoki CR 13VBY Chvostová píla papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Hikoki. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Hikoki CR 13VBY Chvostová píla v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Hikoki Chvostové píly
Ďalšie príručky od Chvostové píly

Často kladené otázky o Hikoki CR 13VBY Chvostová píla

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Hikoki CR 18DSL Chvostová píla

Návod

Hikoki CR 13VEY Chvostová píla

Návod

Bosch GFZ 16-35 AC Chvostová píla

Návod

Ryobi RRS18X-0 Chvostová píla

Návod

Skil 4961 DA Chvostová píla

Návod

Skil 4900 AG Chvostová píla

Návod

Parkside PSSA 18 A1 Chvostová píla

Návod

AEG USE 900 X Chvostová píla

Súvisiace kategórie