Návod Hikoki CS 30SB Reťazová píla

Návod

7

English

Pinching the saw chain along the top of the guide

bar may push the guide bar rapidly back towards the

operator.

Either of these reactions may cause you to lose control

of the saw which could result in serious personal

injury. Do not rely exclusively upon the safety devices

built into your saw. As a chain saw user, you should

take several steps to keep your cutting jobs free from

accident or injury.

Kickback is the result of tool misuse and/or incorrect

operating procedures or conditions and can be avoided

by taking proper precautions as given below:

○ Maintain a fi rm grip, with thumbs and fi ngers encircling

the chain saw handles, with both hands on the saw

and position your body and arm to allow you to resist

kickback forces. Kickback forces can be controlled by

the operator, if proper precautions are taken. Do not let

go of the chain saw.

○ Do not overreach and do not cut above shoulder

height. This helps prevent unintended tip contact and

enables better control of the chain saw in unexpected

situations.

○ Only use replacement bars and chains specifi ed by the

manufacturer. Incorrect replacement bars and chains

may cause chain breakage and/or kickback.

○ Follow the manufacturer’s sharpening and maintenance

instructions for the saw chain. Decreasing the depth

gauge height can lead to increased kickback.

Chain brake operation:

If a chain saw hits a solid object at a high speed it reacts

violently and kicks back. This is diffi cult to control and

could be dangerous, especially with lightweight tools

that tend to be used in all kind of positions. The chain

brake immediately stops the chain from rotating if there

is an unexpected kickback. The chain brake can be

activated by pressing your hand against the handguard

or automatically by the kickback itself.

The chain brake can only be reset after the motor

has stopped completely. Reset the handle to the rear

position (Fig. 3). Check the function of the chain brake

every day.

ADDITIONAL SAFETY WARNINGS

1. Use the electrical voltage listed on the name plate for

the power source.

The use of a voltage that exceeds this may result in

injury.

2. Work without pressure. In addition, always keep your

body warm.

3. Before commencing work, refl ect fully on the work

procedures involved and work to avoid accidents,

otherwise injury may occur.

4. Do not use in the event of bad weather, such as strong

wind, rain, snow, fog, or in areas prone to rockfall or

avalanches.

In bad weather, judgment may be impaired and the

vibration may result in disaster.

5. When visibility is poor, such as during bad weather or

night, do not use the unit. In addition, do not use it in

rain or in a location exposed to rain.

Unstable foothold or loss of balance may result in an

accident.

6. Check the guide bar and saw chain before starting the

unit.

○ If the guide bar or saw chain is cracked, or the product

is scratched or bent, do not use the unit.

○ Check if the guide bar and saw chain are securely

installed. If the guide bar or saw chain is broken or

dislodged, this may result in an accident.

7. Before starting work, check to ensure the switch does

not engage unless the lock-off button is pressed.

If the unit does not working properly, immediately stop

using and request repair from your HiKOKI Authorized

Service Center.

8. Install the saw chain properly, in accordance with the

instruction manual.

If installed incorrectly, the saw chain will come off the

guide bar and injury may occur.

9. Never remove any of the safety devices equipped

on the chain saw (brake lever, lock-off button, chain

catcher etc.).

In addition, do not alter or immobilize them.

Injury may occur.

10. In the following cases, switch the unit off and ensure

the saw chain is no longer moving:

○ When not in use or being repaired.

○ When shifting to a new work location.

○ When inspecting, adjusting or replacing the saw chain,

guide bar, chain case and any other part.

○ When refi lling the chain oil.

○ When removing dust etc. from the body.

○ When removing obstacles, trash or sawdust generated

from work from the work area.

○ When you take off the unit, or when you get away from

the unit.

○ Otherwise, if you sense danger or anticipate risk.

If the saw chain is still moving, an accident may occur.

11. Work should generally be performed individually.

When multiple individuals are involved, ensure

suffi cient spacing between them.

In particular, when felling standing trees or working on

a slope, if you anticipate trees falling, rolling or sliding,

ensure there is no danger to other workers.

12. Remain more than 15 m away from other people.

In addition, when working with multiple persons,

remain 15 m or more apart.

○ There is a risk of impact with scatters and other

accidents.

○ Prepare a whistle alert etc. and determine appropriate

contact method for other workers beforehand.

13. Before felling standing trees, ensure the following:

○ Determine a safe evacuation location prior to felling.

○ Remove obstacles (e.g., branches, shrubs) in advance.

○ Based on a comprehensive evaluation of the state

of the tree to be felled (e.g., trunk bend, tension of

branches) and the surrounding situation (e.g., state of

adjacent trees, presence of obstacles, terrain, wind),

decide on the direction in which the standing tree will

fall and then plan the felling procedure.

Careless felling may result in injury.

14. When felling standing trees, ensure the following:

○ During work, be very careful of the direction in which

trees fall.

○ When working on a slope, ensuring the tree will not roll,

always work from the uphill side of the terrain.

○ When the tree starts falling, switch the unit off , alert

the surroundings, and immediately retreat to a safe

location.

○ During work, if the saw chain or guide bar become

entangled in the tree, switch off and use a wedge.

15. During use, if the unit performance deteriorates, or you

notice any abnormal sound or vibration, immediately

switch off and discontinue use, and return to your

HiKOKI Authorized Service Center for inspection or

repair.

If you continue using, injury may occur.

16. If the unit is accidentally dropped or exposed to impact,

inspect carefully for damage or cracks and ensure

there is no deformation.

If the unit is damaged, cracked or deformed, injury may

occur.

17. When transporting the unit by car, secure the unit to

prevent it moving.

There is a risk of accident.

0000Book̲CS30SB.indb70000Book̲CS30SB.indb7 2017/12/1513:42:492017/12/1513:42:49

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Hikoki CS 30SB Reťazová píla papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Hikoki. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Hikoki CS 30SB Reťazová píla v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Hikoki Reťazové píly
Ďalšie príručky od Reťazové píly

Často kladené otázky o Hikoki CS 30SB Reťazová píla

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Hikoki CS 3630DA Reťazová píla

Návod

Hikoki CS 30Y Reťazová píla

Návod

Hikoki CS 33EB Reťazová píla

Návod

Hikoki CS 33EDP Reťazová píla

Návod

Parkside PBKS 53 B3 Reťazová píla

Návod

EGO CS1410E Reťazová píla

Návod

Güde KS 401 E Reťazová píla

Návod

Güde KS 501 B Reťazová píla

Súvisiace kategórie