Návod Hikoki H 45ME Búracie kladivo

Návod

3

English

DEMOLITION HAMMER SAFETY

WARNINGS

1. Wear ear protectors.

Exposure to noise can cause hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring or its own

cord.

Cutting accessory contacting a “live” wire may make

exposed metal parts of the power tool “live” and could

give the operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. Ensure that the power source to be utilized conforms

to the power requirements specifi ed on the product

nameplate.

2. Ensure that the power switch is in the OFF position.

If the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, which could cause a serious

accident.

3. When the work area is removed from the power source,

use an extension cord of suffi cient thickness and rated

capacity. The extension cord should be kept as short as

practicable.

4. Do not touch the bit during or immediately after

operation. The bit becomes very hot during operation

and could cause serious burns.

5. Before starting to break, chip into a wall, fl oor or ceiling,

thoroughly confi rm that such items as electric cables or

conduits are not buried inside.

6. At the start of work, confi rm screw tightening.

7. When working at a highly elevated location, pay attention

to articles and persons below.

8. Wear protective shoes to protect your feet.

9. Wear a dust mask.

Do not inhale the harmful dusts generated in chiseling

operation. The dust can endanger the health of yourself

and bystanders.

10. Mounting the tool

○ To prevent accidents, make sure to turn the switch off

and disconnect the plug from the receptacle.

○ When using tools such as bull points, cutters, etc.,

make sure to use the genuine parts designated by our

company.

○ Clean the shank portion of the bull point. Then smear the

shank portion with the grease or machine oil.

11. The impact rate cannot be changed by pressing the

impact rate selector switch while the motor is rotating.

To change speeds, switch off the tool fi rst.

12. Be sure to grip the handle and side handle during work.

Do not hold by the grip during work. If you pull it by

mistake, the bull point could jump out.

13. RCD

The use of a residual current device with a rated residual

current of 30mA or less at all times is recommended.

SYMBOLS

WARNING

The following show symbols used for the machine.

Be sure that you understand their meaning before

use.

H45ME / H45MEY : Demolition Hammer

Read all safety warnings and all instructions.

Only for EU countries

Do not dispose of electric tools together with

household waste material!

In observance of European Directive 2002/96/

EC on waste electrical and electronic equipment

and its implementation in accordance with

national law, electric tools that have reached

the end of their life must be collected separately

and returned to an environmentally compatible

recycling facility.

V

Rated voltage

P

Power Input

Bpm Full-load impact rate

kg

Weight

(According to EPTA-Procedure 01/2003)

Switching ON

Switching OFF

Power lamp

Impact rate selector switch

Display lamp

L

Low impact rate

H

High impact rate

Disconnect mains plug from electrical outlet

Class II tool

Prohibited action

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the

accessories listed in the below.

○ Plastic Case .................................................................1

○ Bull Point (SDS-max shank) .........................................1

○ Side Handle ..................................................................1

Standard accessories are subject to change without notice.

000Book̲H45ME.indb3000Book̲H45ME.indb3 2017/12/0416:07:442017/12/0416:07:44

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Hikoki H 45ME Búracie kladivo papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Hikoki. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Hikoki H 45ME Búracie kladivo v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Hikoki Búracie kladivá
Ďalšie príručky od Búracie kladivá

Často kladené otázky o Hikoki H 45ME Búracie kladivo

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Hikoki H 41ME Búracie kladivo

Návod

Hikoki H 60ME Búracie kladivo

Návod

Hikoki H 65SB3 Búracie kladivo

Návod

Hikoki H 25PV Búracie kladivo

Návod

Einhell TE-DH 1027 Búracie kladivo

Návod

Scheppach DH1000PLUS Búracie kladivo

Návod

Hilti TE 1000-AVR Búracie kladivo

Návod

Makita HM1802 Búracie kladivo

Súvisiace kategórie