Návod Hoover TX51PAR 011 Vysávač

Návod

3

A nozzle type HF is suitable for use only on hard oor.

A nozzle of type CA is suitable for use only on carpet.

The other nozzles are accessories for specialist cleaning tasks and are recommended

for occasional use only.

The Crevice tool, Furniture nozzle and Dusting brush are stored on board under

the accessories door.

All accessories can be tted to the end of the handle or the end of the telescopic

tube.

Accessory Set :

Crevice Tool –

For corners and hard to reach areas.

[w1]

Furniture Nozzle – For soft furniture and fabrics. [w2]

DustingBrush–For bookshelves, frames, keyboards and other delicate areas. [W3]

Parquet Nozzle* – For parquet oors and other delicate oors. [Z]

Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep

cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet

hairs removal. [X]

AllergenRemoverMiniTurboNozzle*–Use the mini turbo nozzle on stairs or for deep

cleaning on textile surfaces and other hard to clean areas, particularly suitable for allergen

removal. [Y]

IMPORTANT: Do not use mini turbo nozzles on rugs with long fringes, animal hides and

carpet pile deeper than 15mm. Do not keep the nozzle stationary while brush is rotating.

CLEANER MAINTENANCE

For models equipped with LED bag check indicator* (see H1), both full bag and

obstructions are signaled by a red light on the display.

For models equipped with the other type of bag check indicator* (see D), the mechanism

turns red if bag is full and if obstructions occur.

ReplacingtheDustBag

If the bag check indicator turns red on the bag door* (see D), or on the display*(see H1)

please check the bag and, if necessary, replace with it.

1. Lift the bag door release latch, open the bag door and remove the bag.

[12,13]

The

full dust bag should be disposed correctly and carefully.

[14]

2. Fold a new bag as shown on the bag and t by inserting the collar into the bag

holder.

[13]

3. Close the Bag door.

WARNING: The bag door will NOT close if the dust bag and/or the bag holder

are not assembled to the cleaner. Always ensure the bag is present when closing

the bag door.

REMEMBER: The bag check indicator also turns red (D or H1)** if an obstruction

has occurred. In this case refer to ‘Remove a Blockage from the System’.

CleaningtheFilters

To ensure constant optimum performances from your cleaner, please wash the

lters after each 5 bag changes.

Cleaningthepre-motorlter:

1. Lift the bag door release latch to open bag door and remove the bag. [12,13]

2. Remove the pre-motor lter frame from the cleaner. [15]

3. Remove the lter from the pre-motor lter frame. [16]

4. Wash the pre-motor lter and the pre-motor lter frame using hand warm water, and

allow it to dry thoroughly before inserting into the cleanerr. [19,20]

Cleaningtheexhaustlter

1. Remove the exhaust lter, unclip the exhaust lter cover and remove the exhaust

lter pack.

[17,18]

2. Wash the exhaust lter pack in hand warm water, and allow it to dry thoroughly

before inserting into the cleaner.

[19,20]

Remember: Do not use hot water or detergents. In the unlikely event of the lters

becoming damaged, t a Genuine Hoover replacement. Do not try and use the product

without a dust bag or lters tted.

Cleaningthepermanentclothdustbag*(*Certainmodelonly)

To maintain optimum performance we recommended that you wash the permanent cloth

dust bag after every 5 full bags. Empty the contents of the bag into a bin, wash the bag

under warm water, remove excess water and leave to dry fully before replacing.

Removingablockagefromthesystem

If the bag check indicator turns red* (D) or remains lit* (H1):

1. Check if the bag is full. If so refer to ‘Replacing the Dust Bag’.

2. If it is not full, then:

A. Do the lters need cleaning? If so refer to ‘Cleaning the Filter’.

B. Check if there is any other blockage in the system.

- Use a cord or a stick to remove any blockage from the telescopic tube or exible

hose.

Warning - The bag check indicator will remain red*or lit* if the cleaner is used when

the bag is full, if there is a blockage or if the lters are dirty. If the cleaner is used for

a signicant period of time with the bag check indicator illuminated, an thermal cut

out will switch the cleaner off to prevent overheating. The bag check indicator turns

off once the cleaner has switched off to signal that the thermal cut out has been

activated. If this should happen, switch the cleaner off, unplug and correct the fault.

It will take about 30 minutes for the cut out to automatically.

*Certain Models Only ** May vary according to model

GB

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Hoover TX51PAR 011 Vysávač papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Hoover. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Hoover TX51PAR 011 Vysávač v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Hoover Vysávače
Ďalšie príručky od Vysávače

Často kladené otázky o Hoover TX51PAR 011 Vysávač

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Hoover HF122GPT 011 Vysávač

Návod

Hoover HF18DPT 011 Vysávač

Návod

Hoover TXL21PET011 Vysávač

Návod

Hoover HE730ALG 011 Vysávač

Návod

Hoover HP332ALG 011 Vysávač

Návod

Hoover TPP 2320 Purepower Vysávač

Návod

Hoover HF18CAR 011 Vysávač

Návod

Hoover HE710HM 011 Vysávač

Súvisiace kategórie