Návod Husqvarna 522HDR60X Plotové nožnice

Potrebujete príručku pre svoj Husqvarna 522HDR60X Plotové nožnice? Nižšie si môžete bezplatne prezrieť a stiahnuť príručku vo formáte PDF v slovenskom jazyku. Tento produkt má momentálne 4 často kladené otázky, 0 komentárov a má 0 hlasov. Ak toto nie je manuál, ktorý chcete, kontaktujte nás.

Je váš výrobok pokazený a nepodarilo sa vám problém odstrániť pomocou pokynov v návode? Prejdite na portál Repair Café, kde nájdete bezplatné servisné služby.

Návod

Loading…

Be careful with fuel. Fuel is flammable and the fumes
are explosive and can cause injuries or death.
Do not breathe in the fuel fumes, it can cause injury.
Make sure that there is a sufficient airflow.
Do not smoke near the fuel or the engine.
Do not put warm objects near the fuel or the engine.
Do not add the fuel when the engine is on.
Make sure that the engine is cool before you refuel.
Before you refuel, open the fuel tank cap slowly and
release the pressure carefully.
Do not add fuel to the engine in an indoor area. Not
sufficient airflow can cause injury or death because
of asphyxiation or carbon monoxide.
Tighten the fuel tank cap fully. If the fuel tank cap is
not tightened, there is a risk of fire.
Move the product a minimum of 3 m / 10 ft from the
position where you filled the tank before a start.
Do not fill the fuel tank fully. Heat causes the fuel to
expand. Keep a space at the top of the fuel tank.
Safety instructions for maintenance
WARNING: Read the warning instructions
that follow before you use the product.
Stop the engine and make sure that the cutting
equipment stops. Let the product become cool
before you do the maintenance.
Disconnect the spark plug cap before you do the
maintenance.
The exhaust fumes from the engine contain carbon
monoxide, an odourless, poisonous and very
dangerous gas that can cause death. Do not run the
product indoors or in closed spaces.
The exhaust fumes from the engine are hot and can
contain sparks. Do not run the product indoors or
near flammable material.
Accessories and changes to the product that are not
approved by the manufacturer, can cause serious
injury or death. Do not change the product. Always
use original accessories.
If the maintenance is not done correctly and
regularly, there is an increased risk of injury and
damage to the product.
Only do the maintenance as this operator's manual
recommends. Let an approved Husqvarna service
agent do all other servicing.
Let an approved Husqvarna service agent do
servicing on the product regularly.
Replace damaged, worn or broken parts.
Operation
Introduction
WARNING: Read and understand the safety
chapter before you use the product.
Fuel
This product has a two-stroke engine.
CAUTION: Incorrect type of fuel can result in
engine damage. Use a mixture of gasoline
and two-stroke oil.
Premixed fuel
Use Husqvarna premixed alkylate fuel of a good
quality, for best performance and extension of the
engine life. This fuel contains less harmful chemicals
compared to regular fuel, which decreases harmful
exhaust fumes. The quantity of remains after
combustion is lower with this fuel, which keeps the
components of the engine more clean.
To mix fuel
Gasoline
Use good quality unleaded gasoline with a maximum
of 10% ethanol contents.
CAUTION: Do not use gasoline with an
octane grade less than 90 RON/87 AKI.
Use of a lower octane grade can cause
engine knocking, which causes engine
damages.
We recommend that you use gasoline of a higher
octane grade for work with continuously high rpm.
Two-stroke oil
For best results and performance use Husqvarna
two-stroke oil.
If Husqvarna two-stroke oil is not available, use a
two-stroke oil of good quality for air-cooled engines.
Speak to your servicing dealer to select the correct
oil.
CAUTION: Do not use two-stroke oil for
water-cooled outboard engines, also
referred to as outboard oil. Do not use oil
for four-stroke engines.
To mix gasoline and two-stroke oil
Gasoline, liter Two-stroke oil,
liter
2% (50:1)
5 0.10
864 - 003 - 19.03.2019 7
Stiahnuť návod v slovenčine (PDF, 3.4 MB)
(Myslite ekologicky a návod si vytlačte, len ak je to naozaj potrebné)

Loading…

Hodnotenie

Dajte nám vedieť svoj názor na Husqvarna 522HDR60X Plotové nožnice a ohodnoťte výrobok. Chcete sa podeliť o svoje skúsenosti s týmto výrobkom alebo sa niečo spýtať? Napíšte komentár v spodnej časti stránky.
Ste spokojní s Husqvarna 522HDR60X Plotové nožnice?
Áno Žiadny
Ohodnoťte výrobok ako prvý
0 hlasy

Zapojte sa do diskusie o tomto výrobku

Tu sa môžete podeliť o to, čo si myslíte o Husqvarna 522HDR60X Plotové nožnice. Ak máte otázku, najprv si pozorne prečítajte návod. Vyžiadanie manuálu je možné vykonať pomocou nášho kontaktného formulára.

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Husqvarna 522HDR60X Plotové nožnice papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Husqvarna. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Husqvarna 522HDR60X Plotové nožnice v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Značka Husqvarna
Model 522HDR60X
Kategória Plotové nožnice
Typ súboru PDF
Veľkosť súboru 3.4 MB

Všetky príručky pre Husqvarna Plotové nožnice
Ďalšie príručky od Plotové nožnice

Často kladené otázky o Husqvarna 522HDR60X Plotové nožnice

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Ako zistím, že je môj strihač živých plotov tupý? Overená

Keď sa namiesto strihania ťahajú konáre, plotostrih je tupý a treba ho nabrúsiť.

Bolo to užitočné (345) Čítaj viac

Ako nabrúsim čepele nožníc na živý plot? Overená

Naostrenie nožov nožníc na živý plot je dôležité pre zachovanie výkonu a účinnosti nástroja. Na brúsenie čepelí budete potrebovať pilník alebo brúsny kameň špeciálne navrhnutý pre typ čepele vašej nožnice na živý plot.

Bolo to užitočné (299) Čítaj viac

Ako mám namazať čepele nožníc na živý plot? Overená

Mazanie čepelí nožníc na živý plot pomôže znížiť trenie a opotrebovanie, čím sa predĺži životnosť nástroja. Použite vysokokvalitný mazací olej špeciálne navrhnutý pre nožnice na živé ploty a po každom použití naneste malé množstvo na čepele.

Bolo to užitočné (147) Čítaj viac

Ako môžem zabrániť tvorbe hrdze na mojich nožoch na živé ploty? Overená

Hrdza môže spôsobiť poškodenie čepelí nožníc na živé ploty, čím sa zníži ich výkon a životnosť. Aby ste predišli hrdzi, čepele po každom použití dôkladne očistite a vysušte a uložte ich na suchom a čistom mieste. Môžete tiež zvážiť nanesenie ochranného náteru, ako je olej alebo inhibítor hrdze, na čepele pred ich uskladnením.

Bolo to užitočné (89) Čítaj viac
Návod Husqvarna 522HDR60X Plotové nožnice

Súvisiace produkty

Súvisiace kategórie

×
Download