Návod Kinzo Ecoline Teplovzdušná pištoľ

Návod

4

A

5 ADDITIONAL SAFETY INSTRUCTIONS

• Do not place your hand over the air vents or block the vents in any way.

• The nozzle and accessories of this tool become extremely hot during use. Let these parts cool down before

touching.

• Always switch the tool o before putting it down.

• Do not leave the tool unattended while it is switched on.

• A re may arise if the appliance is not used with care

• Heat may be conducted to combustible materials hat are out of sight.

• Do not use in a damp atmosphere, where ammable gases may be present or near combustible materials.

• Allow the tool to cool fully before storing.

• Ensure adequate ventilation as toxic fumes may be produced.

• Do not use as a hairdryer.

• Do not obstruct either the air intake or nozzle outlet, as this may cause excessive heat build up resulting in

damage to the tool.

• Do not direct the hot air blast at other people.

• Do not touch the metal nozzle as it becomes very hot during use and remains hot for up to 30 minutes

after use.

• Do not place the nozzle against anything while using or immediately after use.

• Do not poke anything down the nozzle as it could give you an electric shock. Do not look down the nozzle

while the unit is working because of the high temperatures being produced.

• Do not allow paint to adhere to the nozzle or scraper as it could ignite after some time.

6 REMOVING PAINT

• Do not use this tool to remove paint containing lead. The peelings, residue and vapors of paint may

contain lead, which is poisonous. Any pre-1960 building may have been painted in the past with paint

containing lead and covered with additional layers of paint. Once deposited on surfaces, hand to mouth

contact can result in the ingestion of lead. Exposure even to low levels of lead can cause irreversible dam-

age to the brain and nervous system. Young and unborn children are particularly vulnerable.

• When removing paint, ensure that the work area is enclosed. Preferably wear a dust mask.

• Do not burn the paint. Use the scraper provided and keep the nozzle at leaf 25 mm away from the painted

surface. When working in a vertical direction, work downwards to prevent paint from falling into the tool

and burning.

• Dispose of all paint debris safely and ensure that the work area is thoroughly cleaned after completing the

work.

7 ASSEMBLY AND ADJUSTMENT

Prior to assembly and adjustment always unplug the tool

The air temperature can be adjusted to suit a wide range of applications. The table below suggests settings

for dierent applications.

Setting Applications

I - Drying paint and varnish.

- Removing stickers.

- Waxing en de-waxing.

- Drying wet timber prior to lling.

- Shrinking PVC wrapping and insulation tubes.

- Thawing frozen pipes.

II - Welding plastics.

- Bending plastic pipes end sheets.

- Loosening rusted or tightly fastened nuts and bolts.

II - Removing paint and lacquer.

- Soldering plumbing joints.

72168 Manual.indd 4 31-12-10 15:12

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Kinzo Ecoline Teplovzdušná pištoľ papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Kinzo. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Kinzo Ecoline Teplovzdušná pištoľ v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Kinzo Teplovzdušné pištole
Ďalšie príručky od Teplovzdušné pištole

Často kladené otázky o Kinzo Ecoline Teplovzdušná pištoľ

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Facom E.2015 Teplovzdušná pištoľ

Návod

Extol 8794800 Teplovzdušná pištoľ

Návod

Parkside IAN 46460 Teplovzdušná pištoľ

Návod

Steinel HG 2320 E Teplovzdušná pištoľ

Návod

Ryobi R18HG-0 Teplovzdušná pištoľ

Návod

Parkside IAN 313642 Teplovzdušná pištoľ

Návod

Parkside PLHLG 2000 A1 Teplovzdušná pištoľ

Návod

Patriot HP1800 Teplovzdušná pištoľ

Súvisiace kategórie