Návod Lanaform LA120124 Dobra Zvlhčovač

Návod

5 / 36 English

EN FR NL DE ES IT PL CS SK SL HR BG

outlet pipe [







]. Make sure that this and

the closing cover of the mist outlet pipe [







] are in the right position. [



]

Adjusting the mist intensity

Press the touch control button [



1



16] re-

peatedly to adjust the emission of cool mist:

•

press once: maximum intensity is selected

(approximately 150 ml/hr). The LED indica-

tor

[



1



15]

under the symbol “H” lights up.

•

Press twice: minimum intensity is selected

(approximately 120 ml/hr). The LED indica-

tor [



1



15] under the symbol “L” lights up.

•

Press 3 times: the humidier runs on

“night” mode. The white atmospheric light

is then disabled and the light indicator

[



1



15]

“



” goes out after 3 seconds.

When there is no water left in the reservoir,

the humidier stops and the indicator dis-

plays red for  seconds. You can also stop it

at any time by pressing a fourth time on the

touch control button.

Light settings

When the device lights up, it does not emit

any atmospheric light by default.

•

Press the button that chooses the light

mode [



1



17] once: a warm white light

is activated.

•

Then press the button that selects the light

mode [



1



17] repeatedly to change the

temperature of the white light to a neutral

then cool white light.

•

Press a fourth time and the light will go out.

Important notes

• Use only clean distilled or demineralised

water in order to avoid any malfunction.

•

Do not pour water into the exhaust pipe

[



1



10]

to prevent any dysfunction and re risk.

• Make sure you close the reservoir lid [



1



1] hermetically.

• The reservoir must be kept clean. If there

is any dirt on the vapour emission diuser

sprinkler tip, clean it with a brush or a

damp cloth.



Please note: even though there

is a safety device that stops the

transducer from working, do

not leave the device connected

when you are not using it.



Additional information about

the use of essential oils:

Before using essential oils, please check the

harmful eects that use of these products

may have on your health.

Always choose quality essential oils that are

pure,   natural and intended for diusion.

Use them in moderation and with care. Follow

the instructions and warnings stated on the

packaging of the essential oils, in particular

noting that:

•

Pregnant women, people with epilepsy,

asthmatics and people who suer from

allergies, those with heart problems or se-

rious illnesses should not use essential oils.

•

Essential oils should be used only for peri-

ods not exceeding 10 minutes in the room

of a baby (under 3 years old) and only

when the baby is not actually in the room.

•

Make sure that children and minors do

not play with or use the device.

• Just a few drops (3 to 4 drops at most) of

essential oils are sucient to ensure that

the device works properly and the scent

is diused. Excessive use of essential oils

could damage the device.

•

Make sure you pour water into the res-

ervoir rst before adding the drops of

essential oils.

•

Lanaform cannot be held liable in the

event of accidental damage resulting from

any use contrary to the instructions given

in these instructions for use.

MAINTENANCE AND STORAGE

Always switch o the humidier before per-

forming any maintenance or storage activities.

If the water contains too much calcium and

magnesium, it may deposit a white powder

in the device. If this foam is deposited on

the transducer [



1



] , this will prevent the

Dobra humidier from working properly.

Maintenance

We recommend

1 using clean distilled, demin-

eralised or boiled water each

time the device is used.

2 Cleaning the reservoir every 2 days and

cleaning the transducer every week.

3 Cleaning the device (see expla-

nations below) and making sure

that all of its parts are complete-

ly dry when it is not in use.

To clean the reservoir [



1



7]

1 Clean the basin with water using

a soft cloth, and use vinegar

if there are any foam or limes-

cale deposits on the inside.

2 Rinse the basin in clean water.

To clean the transducer [



1



11]

1 Place 2 to 5 drops of vinegar on its

surface and leave for 2 to 5 minutes.

2 Brush the foam o the surface

using a soft brush. Do not use a

hard tool to scrape the surface.

3 Then rinse the reservoir in clean water.



Do not use soap, solvent

or spray cleaner to clean

the transducer.

To clean the mist outlet

pipe [



1



3]

1 Remove the unit’s reservoir cap [



1



].

2 Turn the reservoir lid [



1



1] in

an anti-clockwise direction.

3 Remove the mist outlet pipe cap

as well as the ring. [



1



4 & 5]

4 Clean it all with a brush or damp cloth

and vinegar if there are any foam or

limescale deposits on the inside.

5 Position the ring and the mist

outlet pipe cap again as indi-

cated on diagram [



].

6 Close the reservoir cap by turning it in

an anti-clockwise direction, making sure

that the notches are correctly inserted

into those of the mist outlet pipe.

To clean the diuser

nozzle of the device [



1



2]

1 Clean it with a brush or damp cloth.

2 Rinse the vapour emission

sprinkler tip in clean water.

Storage

If you do not intend using the device for a

lengthy period, store the clean, dry humidier

in a cool, dry place out of direct light.

TROUBLESHOOTING

In the event of a malfunction under nor-

mal conditions of use, please refer to the

following list.



No operating indicator light, no mist.



No voltage, no current.



Check whether the device is connected

and that there is no mains fault.



Red indicator light ashing

 times, no mist.



No water in the reservoir.



Pour clean, fresh, distilled or

demineralised water into the reservoir.



The mist has an unpleasant odour.



The device is new.



Drain the water from the reservoir

and leave the reservoir to air

out for at least  hours.



The water is polluted or has been

in the reservoir too long.



Unplug the device, drain the water

from the reservoir, rinse and clean the

reservoir, and ll the reservoir with

demineralised or distilled water.

E-IM-Dobra-LA120124-001-2019-v1.0.indd 5 23/09/2019 09:10:40

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Lanaform LA120124 Dobra Zvlhčovač papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Lanaform. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Lanaform LA120124 Dobra Zvlhčovač v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Lanaform Zvlhčovače
Ďalšie príručky od Zvlhčovače

Často kladené otázky o Lanaform LA120124 Dobra Zvlhčovač

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Lanaform Family Care Zvlhčovač

Návod

Lanaform LA120120 Pommy Zvlhčovač

Návod

Lanaform Hello Kitty Zvlhčovač

Návod

Lanaform Notus Zvlhčovač

Návod

Lanaform Charly Zvlhčovač

Návod

Lanaform LA120123 Breva Zvlhčovač

Návod

Lanaform Lily Zvlhčovač

Návod

Lanaform LA120125 Napo Zvlhčovač

Súvisiace kategórie