Návod Parkside IAN 391284 Leštička

Návod

■ 6 

│

 GB

│

IE PAAP 12 C3

e) The external diameter and thickness of the

accessory tool used must comply with the

dimensions of the power tool. Incorrectly dimen-

sioned accessory tools cannot be sufficiently

shielded or controlled.

f) The thread of the accessories must match the

thread of the grinding spindle. For accessories

mounted by means of a flange, the bore of

the accessory must match the diameter of the

flange. Accessories that do not fit on the appli-

ance will run unevenly, vibrate too much and

this may result in loss of control of the unit.

g) Never use damaged accessory tools. Check

accessory tools such as grinding discs before

each use for chips or cracks, grinding plates

for cracks, wearing or excessive wear and

tear and wire brushes for loose or broken

wires. If the power tool or the accessory tool

in use is dropped, check to see if it is dam-

aged or use an undamaged accessory tool.

Once you have checked and inserted the

accessory tool, ensure that you and any other

people in the vicinity remain outside of the

level of the rotating accessory tool and allow

the power tool to rotate at maximum speed

for one minute. Damaged accessory tools

usually break during this test period.

h) Wear personal protective equipment.

Depending on the application, ensure that

you use full face protection, eye protection or

goggles. If required, use a dust mask, ear

protectors, protective gloves or a special

apron to protect you from grindings and

material particles. Eyes should be protected

from flying debris that may be caused during

certain applications. A dust or respiratory mask

must filter the dust generated during use. If you

are exposed to loud noise for any length of

time, you can suffer a hearing loss.

i) Ensure that other people remain at a safe

distance from your workspace. Anyone who

enters the workspace must wear personal

protective equipment. Fragments of the work-

piece or broken accessory tools can fly off and

cause injury – even outside the immediate

working area.

j) Never remove the power tool before the

accessory tool has come to a complete stop.

The rotating accessory tool could come into

contact with the surface and cause you to lose

control of the power tool.

k) Do not leave the power tool running whilst

carrying it. Accidental contact between your

clothing and the rotating accessory tool could

cause your clothing to get caught and the

accessory tool to penetrate a part of your body.

l) Clean the ventilation slits in your power tool

regularly. The motor fan draws dust into the

housing and the accumulation of a large

amount of metal dust can cause electrical haz-

ards.

m) Do not use the power tool near flammable

materials. Sparks can ignite such materials.

n) Do not use accessory tools that require liquid

coolant. The use of water or other liquid coolants

may lead to an electric shock.

Kickback and corresponding safety

instructions

Kickback is a sudden reaction caused when a

rotating accessory tool, e.g. grinding disc, grinding

plate, wire brush, etc., catches or blocks. Catching

or blocking leads to an abrupt stop of the rotating

accessory tool. If this happens, an uncontrolled

power tool turns rapidly against the direction of

rotation of the accessory tool caught in the block-

age.

If, for example, a grinding disc catches or jams, the

edge of the grinding disc that is projecting into the

workpiece can get caught and break off the grind-

ing disc or cause a kickback. The grinding disc can

then fly in the direction of the operator or away

from them, depending on the direction of rotation

of the disc at the blockage. This can also break

grinding discs.

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Parkside IAN 391284 Leštička papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Parkside. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Parkside IAN 391284 Leštička v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Parkside Leštičky
Ďalšie príručky od Leštičky

Často kladené otázky o Parkside IAN 391284 Leštička

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Parkside IAN 494229 Leštička

Návod

Parkside PAAP 12 A1 Leštička

Návod

Parkside IAN 434654 Leštička

Návod

Parkside IAN 426379 Leštička

Návod

Parkside IAN 332964 Leštička

Návod

Parkside IAN 322636 Leštička

Návod

Parkside PAAP 12 A1 Leštička

Návod

Parkside IAN 322636 Leštička

Súvisiace kategórie