Návod Parkside IAN 409145 Zváračka

Návod

GB/IE/NI/CY/MT

7

KEEP OUT OF THE REACH OF CHILDREN!

z Intended use

The device is designed for welding with solid wire (MIG and MAG), MMA welding (welding with rod

electrodes), TIG welding (tungsten inert gas welding) as well as welding with flux-cored wire.

When using solid wires which do not contain inert gas in solid form, then you must use inert gas in addition.

When using self-shielding flux-cored wire, you do not need to use any additional gas. In this case, the

inert gas is contained in the welding wire in powdered form and is therefore channelled straight into the

arc. This means that the device is not susceptible to wind when working outdoors. Only suitable wire

electrodes may be used for the device. This welding device is designed for manual arc welding (MMA

welding) of steel, stainless steel, steel sheet and cast materials, using the appropriate coated electrodes.

Refer to the information from the electrode manufacturer. Only suitable electrodes may be used for the

device. For tungsten inert gas welding (TIG welding) it is essential that you observe the operating and

safety instructions for the TIG torch you are using, in addition to the instructions and safety instructions in

these operating instructions. If it is not handled properly the product can be dangerous for individuals,

animals and property. Use the product only as described and only for the specific applications as stated.

Keep these instructions in a safe place. Ensure you hand over all documentation when passing the

product on to anyone else. Any use that differs from the intended use as stated above is prohibited and

potentially dangerous. Damage or injury caused by misuse or disregarding the above warning is not

covered by the warranty or any liability on the part of the manufacturer. Commercial use will void the

warranty. Observing the safety instructions and assembly instructions and operating information in the

instructions for use is also a component of the intended use. It is imperative to adhere to the applicable

accident prevention regulations. The device must not be used:

 in insufficiently ventilated rooms,

 in explosive environments,

 to defrost pipes,

 in the vicinity of people with cardiac pacemakers and

 in close proximity to easily flammable materials.

Residual risk

Even if you operate the device as intended, there will be residual risks. The following dangers may occur

in connection with the build and design of this MIG pulse welder:

 Eye injuries caused by glare, touching hot parts of the device or workpiece (burn injury),

 In case of improper protection, risk of accident and fire through sparks and slag particles,

 Harmful emissions from smoke and gases if there is a lack of air or if closed rooms are insufficiently

extracted.

PLEASE NOTE: Reduce the residual risk by carefully using the device as intended and observing

all instructions.

z Scope of delivery

1 Multi-Welder with Double Pulse Technology 200 B1

1 MIG welding torch with 2 m welding cable

1 high-quality, galvanised copper earth terminal, A-shape with 2 m cable

1 electrode holder MMA with 2 m welding cable

4 contact tips for steel/flux-cored wire (1x 0.6 mm; 1x 0.8 mm; 1x 0.9 mm; 1x 1.0 mm)

Labelling in accordance with the diameter: 0.6; 0.8; 0.9; 1.0

1 aluminium nozzle (1x 1.0 mm pre-fitted)

1 chipping hammer

1 welding core for aluminium wire (pre-fitted)

1 welding core for steel/stainless steel and flux-cored wire

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Parkside IAN 409145 Zváračka papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Parkside. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Parkside IAN 409145 Zváračka v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Parkside Zváračky
Ďalšie príručky od Zváračky

Často kladené otázky o Parkside IAN 409145 Zváračka

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Parkside IAN 409152 Zváračka

Návod

Parkside IAN 337263 Zváračka

Návod

Parkside PMSG 200 A1 Zváračka

Návod

Parkside IAN 494641 Zváračka

Návod

Parkside IAN 306962 Zváračka

Návod

Parkside IAN 286510 Zváračka

Návod

Parkside IAN 281416 Zváračka

Návod

Parkside PPS 40 B3 Zváračka

Súvisiace kategórie