Návod Parkside IAN 409152 Zváračka

Návod

11GB/IE/NI/CY/MT

work. These provide protection

from electrical shocks (no-load

voltage of the welding current

circuit), harmful radiations

(heat and UV radiation)

and incandescent metal and

splashes of slag.

 Wear sturdy, insulating shoes.

The shoes should also insulate

when exposed to moisture.

Loafers are not suitable as

falling incandescent metal

droplets can cause burns.

 Wear suitable protective cloth-

ing, no synthetic garments.

 Do not look into the arc

without eye protection; only

use a welding mask with the

prescribed protective glass as

per DIN. In addition to light

and heat radiation, which can

dazzle or cause burns, the

arc also emits UV radiation.

Without suitable protection the

invisible ultraviolet radiation

can cause very painful con-

junctivitis which is not appar-

ent until several hours later.

Furthermore, UV radiation can

cause sunburn-like effects on

unprotected parts of the body.

 Any persons in the vicinity of

the arc or helpers must also be

informed of the dangers and be

equipped with the necessary

protective equipment. If neces-

sary, set up protective walls.

 Ensure an adequate supply

of fresh air whilst welding,

particularly in small spaces, as

it produces smoke and harmful

gases.

 No welding work may be

carried out on containers that

have been used for storing

gases, fuels, mineral oils or

similar – even if they have

been empty for a long time–

as possible residues may

present a risk of explosion.

 Special regulations apply in

rooms where there is a risk of

fire or explosion.

 Welded joints that are subject

to heavy stress loads and are

required to comply with certain

safety requirements may only be

carried out by specially trained

and certified welders. Examples

of this are pressure vessels,

running rails, tow bars, etc.

ATTENTION! Always connect

the earth terminal as close as

possible to the point of weld to

provide the shortest possible

path for the welding current

from the electrode to the earth

terminal. Never connect the

earth terminal to the housing of

the welder! Never connect the

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Parkside IAN 409152 Zváračka papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Parkside. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Parkside IAN 409152 Zváračka v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Parkside Zváračky
Ďalšie príručky od Zváračky

Často kladené otázky o Parkside IAN 409152 Zváračka

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Parkside IAN 306962 Zváračka

Návod

Parkside IAN 337263 Zváračka

Návod

Parkside IAN 310850 Zváračka

Návod

Parkside IAN 373212 Zváračka

Návod

Parkside PFDS 33 A1 Zváračka

Návod

Parkside IAN 70383 Zváračka

Návod

Parkside PFDS 33 B2 Zváračka

Návod

Parkside IAN 332010 Zváračka

Súvisiace kategórie