Návod Parkside IAN 409152 Zváračka

Návod

7GB/IE/NI/CY/MT

INVERTER FLUX CORED WIRE

WELDER PIFDS 120 B2

z Introduction

Congratulations! You have

purchased one of our

high-quality devices. Please

familiarise yourself with the product before

using it for the first time. To do so, please

read through the following operating and

safety instructions carefully. This tool must be

set up or used only by people who have

been trained to do so.

KEEP OUT OF THE REACH OF

CHILDREN!

z Intended use

The device is suitable for self-shielded flux

cored wire welding using an appropriate

wire. No additional gas is required. The

shielding gas is contained in powder form in

the wire itself, thus it is fed directly into the

arc. This means the device is not susceptible

to wind and can be used outside. Only

suitable wire electrodes may be used for

the device. Observing the safety instructions

and assembly instructions and operating

information in the instructions for use is also

a component of the intended use.

It is imperative to adhere to the applicable

accident prevention regulations. The device

must not be used:

– in rooms with insufficient ventilation,

– in explosive atmospheres,

– for the purpose of thawing pipes,

– in the vicinity of people with cardiac

pacemakers and

– in the vicinity of easily inflammable materi-

als. Use the product only as described and

only for the specific applications as stated.

Keep these instructions in a safe place.

Ensure you hand over all documentation

when passing the product on to anyone

else. Any use that differs to the intended

use as stated above is prohibited and

potentially dangerous. Damage or injury

caused by misuse or disregarding the

above warning is not covered by the

warranty or any liability on the part of the

manufacturer.

Commercial use will void the guarantee.

z Package contents

1 inverter flux cored wire welder

PIFDS 120 B2

1 burner nozzle (pre-mounted)

4 welding nozzles (1x 0.9 mm pre-mounted;

1x 0.8 mm; 1x 0.6 mm; 1x 1.0 mm)

1 chipping hammer with wire brush

1 flux cored wire Ø 0.9 mm / 450 g

1 welding protection shield

1 carry strap

1 set of operating instructions

Residual risk

Even if you operate the device as intended,

there will be residual risks. The following

risks can occur in the context of the design

and construction of this inverter flux cored

wire welder:

– eye injuries caused by glare,

– touching hot parts of the device or the

workpiece (burn injuries),

– in the case of insufficient protection, risk of

accidents and burns due to flying sparks

or slag,

Greatest rated value for

welding time in intermittent

mode Σ

t

ON

Greatest rated value for

welding time in continuous

mode Σ

t

ON (max)

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Parkside IAN 409152 Zváračka papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Parkside. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Parkside IAN 409152 Zváračka v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Parkside Zváračky
Ďalšie príručky od Zváračky

Často kladené otázky o Parkside IAN 409152 Zváračka

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Parkside IAN 306962 Zváračka

Návod

Parkside IAN 337263 Zváračka

Návod

Parkside IAN 310850 Zváračka

Návod

Parkside IAN 373212 Zváračka

Návod

Parkside PFDS 33 A1 Zváračka

Návod

Parkside IAN 70383 Zváračka

Návod

Parkside PFDS 33 B2 Zváračka

Návod

Parkside IAN 332010 Zváračka

Súvisiace kategórie