Návod Philips GC8623 PerfectCare Aqua Žehlička

Návod

Energy saving - ECO mode

By using the ECO mode (reduced amount of steam), you can save energy without compromising

on the ironing result.

Note: For the shortest ironing time, we advise you to use the ‘OptimalTemp’ mode.

1 Press the ECO button when the appliance is switched on (Fig. 4).

2 To go back to the ‘OptimalTemp’ mode, press the ECO button again.

Safety auto-off mode (specic types only)

To save energy, the steam generator switches off automatically when it has not been used for 10

minutes. The light in the on/off button ashes.

To reactivate the steam generator, press the on/off button.

IMPORTANT - cleaning and maintenance

Descaling the appliance

When DE-CALC light is ashing, perform the descaling procedure.This helps to prolong the lifetime

of the appliance and optimise the ironing performance.

If your water is very hard, increase the descaling frequency.

To avoid any risk of burns, make sure the appliance has been unplugged for at least 2 hours and

has completely cooled.

Tip: When you perform the descaling procedure, place the appliance on the edge of the table top or near

the sink. Water may ow out of the appliance when the EASY DE-CALC knob is opened.

1 Hold a cup under the EASY DE-CALC knob and turn the knob anti-clockwise. (Fig. 5)

2

Remove the EASY DE-CALC knob and let the water with scale particles ow into the cup (Fig. 6)

.

3 When no more water comes out of the appliance, reinsert the EASY DE-CALC knob and

tighten it. (Fig. 7)

Descaling the soleplate

If you do not descale your appliance regularly, you may see brown stains coming out of the soleplate

due to scale particles. Descale the soleplate by following the procedure below. We advise you to

repeat the procedure twice for better results.

1 Make sure the appliance is cool and clean the soleplate with a damp cloth.

2 Empty the water tank through the lling door. Tilt the appliance and remove the EASY

DE-CALC knob. Pour 500ml distilled water into the DE-CALC opening and tighten the

EASY DE-CALC knob. (Fig. 8)

3 Switch on the appliance and wait for 5 minutes.

4 Keep the steam trigger pressed continuously while you iron a piece of thick cloth in a

back-and-forth motion for 3 minutes. (Fig. 9)

Hot, dirty water comes out of the soleplate.

5 Stop cleaning when no more water comes out of the soleplate or when steam starts coming

out of the soleplate.

6 Unplug the steam generator and let it cool down for at least 2 hours. Remove the EASY

DE-CALC knob and let the remaining water ow out. Tighten the EASY DE-CALC knob.

ENGLISH 7

4239_000_8864_1_DFU Booklet_Simple_A5_v4.indd 7 10/8/13 11:13 AM

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Philips GC8623 PerfectCare Aqua Žehlička papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Philips. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Philips GC8623 PerfectCare Aqua Žehlička v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Philips Žehličky
Ďalšie príručky od Žehličky

Často kladené otázky o Philips GC8623 PerfectCare Aqua Žehlička

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Philips DST7020 Žehlička

Návod

Philips GC7041 PerfectCare Viva Žehlička

Návod

Philips GC9246 PerfectCare Žehlička

Návod

Philips GC9040 Žehlička

Návod

Philips GC8703 Žehlička

Návod

Philips PSG7024 PerfectCare Žehlička

Návod

Philips PSG6042 PerfectCare Žehlička

Návod

Philips GC8410 Žehlička

Súvisiace kategórie