Návod Ryobi RLT6130 Strunová kosačka

Návod

2 | English

■ Hearing protection may restrict the operator’s ability

to hear warning sounds. Pay particular attention to

potential hazards around and inside the working area.

■ Wear heavy, long trousers, boots, and gloves. Do not

wear loose fitting clothing, short trousers, jewellery of

any kind, or use with bare feet.

■ Secure long hair so it is above shoulder level to prevent

entanglement in moving parts.

■ Before use and after any impact, check that there are

no damaged parts. A defective switch or any part that

is damaged or worn should be properly repaired or

replaced by an authorised service facility.

■ Make sure the cutting attachment is properly installed

and securely fastened.

■ Never operate the product unless all guards, deflectors

and handles are properly and securely attached.

■ Consider the environment in which you are working.

Keep the working area free from wires, sticks, stones

and debris, which if struck by the cutter, can become

thrown objects.

ELECTRIC LAWN TRIMMER / EDGE TRIMMER

SAFETY WARNINGS

■

Never allow children or people unfamiliar with these

instructions to use the product. Local regulations may

restrict the age of the operator.

■ Use the product in daylight or with good artificial light.

■ Avoid using on wet grass.

■ Do not walk backwards when using the product.

■ Keep firm footing and balance. Do not overreach.

Overreaching can result in loss of balance. Always be

sure of your footing on slopes. Walk, never run.

■ Keep bystanders, children and pets 15 m away from

the area of operation. Stop the product if anyone enters

the area.

■ Keep the cutting attachment below waist level.

■ Never operate the product with damaged guards or

without guards in place.

■ Never fit a metal replacement line.

■ Keep hands and feet away from the cutting means at all

times, especially when switching on the motor.

■ Beware, the cutting elements continue to rotate after

the motor is switched off.

■ Beware of objects thrown by the cutting means. Clear

debris like small stones, gravel and other foreign

objects from the work area before starting operation.

Wires or string may become entangled with the cutting

means.

■ Turn off the product and disconnect from the power

supply. Make sure all moving parts have come to a

complete stop:

● before servicing

● before clearing a blockage

● before checking, cleaning, and working on the

product

● before changing accessories

● after striking a foreign object

● whenever leaving the product unattended

● whenever performing maintenance

● whenever the product starts to vibrate abnormally

■ The small blade fitted to the lawn guard is designed to

trim the new extended line to the correct length for safe

and optimum performance. It is very sharp; do not touch

it, particularly when cleaning the product.

■ Always ensure that ventilation openings are kept clear

of debris.

■ Make sure the cutting head attachment is properly

installed and securely fastened.

■ Make sure all guards, deflectors, and handles are

properly and securely attached.

■ Do not modify the product in any way. This may

increase the risk of injury to yourself or others.

■ Use only the manufacturer’s replacement cutting line.

Do not use any other cutting attachment.

■ Immediately switch off and disconnect from the mains

in the event of accident or breakdown. Don’t operate

the product again until it has been fully checked by an

authorised service centre.

■ Ensure that the line cut-off blade in guard is properly

positioned and secured before each use.

■ If the supply cord is damaged, it must be replaced

by a special cord or assembly available from the

manufacturer or its service agent.

■ Before every use, examine the supply cord for damage.

If there are signs of damage, it must be replaced by

a qualified person at an authorised service centre to

avoid hazard.

TRANSPORTATION AND STORAGE

■

Stop the product and allow it to cool down before

storing or transporting. Always disconnect from the

power supply and wind the cable to prevent damage.

■ Clean all foreign materials from the product. Store it in

a cool, dry and well-ventilated place that is inaccessible

to children. Keep away from corrosive agents, such

as garden chemicals and de-icing salts. Do not store

outdoors.

■ For transportation in vehicles, secure the product

against movement or falling to prevent injury to persons

or damage to the product.

MAINTENANCE

WARNING

Use only original manufacturer’s replacement parts,

accessories, and attachments. Failure to do so can

cause possible injury, contribute to poor performance,

and may void your warranty.

WARNING

Servicing requires extreme care and knowledge

and should be performed only by a qualified service

technician. For service, bring the product to the nearest

authorised service centre for repair. When servicing, use

only original replacement parts.

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Ryobi RLT6130 Strunová kosačka papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Ryobi. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Ryobi RLT6130 Strunová kosačka v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Ryobi Strunové kosačky
Ďalšie príručky od Strunové kosačky

Súvisiace produkty

Návod

Ryobi RLT36C33 Strunová kosačka

Návod

Ryobi RLT183115C Strunová kosačka

Návod

Ryobi RLT5030S Strunová kosačka

Návod

Ryobi RBC42FSB Strunová kosačka

Návod

Ryobi RLT30CESA Strunová kosačka

Návod

Ryobi RLT1830H13 Strunová kosačka

Návod

Ryobi RLT183213 Strunová kosačka

Návod

Ryobi RLT1832133H Strunová kosačka

Súvisiace kategórie