Návod SilverCrest IAN 100140 Vyhrievacia podložka

Návod

9 GB

pad was used improperly or will

no longer heat up, it must first be

inspected by the manufacturer

before being switched on again.

If the power cord of the heating

pad is damaged, it must be re-

placed by the manufacturer or

its service department, or a simi-

larly qualified person, to avoid

hazards.

With the heating pad switched

on, never

–

place objects on it (e.g. suitc

ases

or clothes baskets),

– place a heating source such

as a hot-water bottle, heating

pad or similar items on it. The

heating pad may otherwise be

damaged.

The electronic components inside

the control unit will heat up whilst

operating the heating pad. For

this reason, the control unit must

not be covered or be lying on the

heating pad during operation.

This poses a risk of injuries and /

or damage to the heating pad.

Always observe the information

on start-up, cleaning and care,

and storage.

If you have additional questions

on using our products, please

contact our Customer Service

Department.

Safety system

Note: The heating pad is equipped with a safety

system. The electronic sensor technology prevents the

entire surface of the heating pad from overheating

by automatically switching off in the event of a fault.

If the safety system switches the heating pad off au-

tomatically due to a fault, then the function display

2

on the control unit

1

is no longer illuminated, even

if the heating pad is switched on.

Please note that, for safety reasons, the heating

pad must not be used after a fault and must be

returned to the service address indicated.

Start-up

Note: The heating pad may smell of plastic the first

time you use it, but this will disappear after a short

period of time.

To begin, first connect the control

1

to the

heating pad with the plug-in connector

3

(see fig. B).

Position the heating pad on your back so that

the fastener for the neck section is in the throat

area.

Then close the fastener.

Then adjust the length of the belt around your

stomach and fit the two ends of the connector

together (see Fig. C) to fasten the belt.

To open the belt, press the two catches on the

connector at the same time (see Fig. C).

Switching on / off / Selecting

the temperature

Switching on:

Set the control unit

1

to 1, 2, 3, 4, 5 or 6, to

switch on the heating pad.

Note: The function display

2

illuminates after

the heating pad is switched on.

Note: This heating pad features rapid heating,

which allows it to heat up within the first 10 mi-

nutes of operation.

Important safety instructions / Safety system / Start-upImportant safety instructions

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu SilverCrest IAN 100140 Vyhrievacia podložka papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať SilverCrest. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu SilverCrest IAN 100140 Vyhrievacia podložka v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre SilverCrest Vyhrievacie podložky
Ďalšie príručky od Vyhrievacie podložky

Často kladené otázky o SilverCrest IAN 100140 Vyhrievacia podložka

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

SilverCrest IAN 275689 Vyhrievacia podložka

Návod

SilverCrest IAN 90989 Vyhrievacia podložka

Návod

SilverCrest IAN 337751 Vyhrievacia podložka

Návod

SilverCrest IAN 302783 Vyhrievacia podložka

Návod

SilverCrest IAN 285269 Vyhrievacia podložka

Návod

SilverCrest IAN 353724 Vyhrievacia podložka

Návod

SilverCrest IAN 285267 Vyhrievacia podložka

Návod

SilverCrest IAN 375146 Vyhrievacia podložka

Súvisiace kategórie