Návod Whirlpool AKZ9S 8271 IX Rúra

Návod

Please note: to ensure that the water is cold, it is not

possible to perform this activity before 30 minutes have

elapsed from the last cycle (or the last time the product

was powered). During this waiting time, the display will

show the following feedback “WATER IS HOT”

• DESCALE

This special function, activated at regular intervals,

allows you to keep the steam system in the best

condition. Once the function is started, follow all the

steps indicated on the display and press

when

done to start each phase. The average duration of the

full function is around 100 minutes.

Please note: If the function is stopped at any time, the

entire descaling cycle must be repeated.

The display will show you when it is time to run a

Descale cycle (see the table below).

DESCALE MESSAGE MEANING

<RECOMMENDED DESCALE>

It appears after around 15 hours of

steam cycles*

It is recommended to run a

Descale cycle.

<PLEASE DESCALE>

It appears after around 20 hours of

steam cycles*

Descale is mandatory. It is

not possible to run a Steam

cycle until a Descale cycle

will be carried out.

*considering the default value (4 - Hard) of water hardness

level. The number of hours of steam cycles that must pass

before the Decale messages are shown depends on the

water hardness level set on the appliance.

The descaling procedure can also be performed whenever

the user desires a deeper cleaning of the internal steam

circuit.

Before to run the descaling phase, the appliance

will check if some residual water is contained into

the boiler, and a Drain cycle could be performed,

if needed. In this case, you will have to empty the

drawer after the Drain cycle, before continuing with

the Descale Phase.

Please note: to ensure that the water is cold, it is not possible

to perform this activity before 30 minutes have elapsed from

the last cycle (or the last time the product was powered).

During this waiting time, the display will show the following

feedback “WATER IS HOT”.

» PHASE 1/2: DESCALING 70 MIN

When display will show <ADD 0.25 L OF SOLUTION>,

please pour the descaling solution in the drawer. For

best results in descaling, we recommend filling the

tank with a solution composed of 75 g of the specific

WPRO product and 250 ml of drinking water. Make

sure the solution dissolves completely in the water

so that no residue remains. WPRO descaler is the

suggested professional product for the maintenance

of the best performance of your steam function in the

oven. For orders and information contact the after

sales service or www.whirlpool.eu. Whirlpool will

not be held responsible for any damage caused by

the use of other cleaning products available on the

market.

1 + +2

= 75 g

250 ml

3

Once the descaling solution is poured inside the

drawer, press

to start the main descaling process.

The descaling phases do not need you to stay in front

of the appliance. After each phase is completed, an

acoustical feedback will be played and the display

will show instructions to proceed with the next

phase.

Once the descaling phase has been completed, the

boiler will be drained: the descaling solution used

during this phase will be poured into the extractable

drawer.

» PHASE 2/2: RINSING (30 min.)

To remove descale residuals from the drawer and the

steam circuit, rinse cycle has to be done. When display

shows <ADD 0.25 L OF WATER> fill the tank with 0,25 L

of drinking water, then press

to start the rinsing. Do

not turn off the oven until all the steps required by the

function have been completed.

When the message “DESCALING COMPLETED” appears

on the display, please press OK to confirm.

Cooking functions cannot be activated during the

cleaning cycle. Please note: A message will be shown

on display, to remind you to execute this operation

regularly.

When Descale procedure is completed, it is suggested

to dry the cavity from potential water residuals. It will

be then possible to use all the steam functions.

Note: during the Descale cycle, some noise could

potentially be heard since the oven pumps are

activated in order to guarantee the optimal descale

efficiency.

Once the maintenance cycle has started, do not remove

the drawer unless requested by the appliance.

. MINUTEMINDER

When the oven is switched off, the display can be

used as a timer. To activate this function, make sure

that the oven is switched off and press

or : The

icon will flash on the display.

Press

or to set the length of time you require and

then press

to activate the timer.

MINUTE-MINDER

An audible signal will sound and the display will

indicate once the minuteminder has finished

counting down the selected time.

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Whirlpool AKZ9S 8271 IX Rúra papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Whirlpool. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Whirlpool AKZ9S 8271 IX Rúra v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Whirlpool Rúry
Ďalšie príručky od Rúry

Často kladené otázky o Whirlpool AKZ9S 8271 IX Rúra

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Whirlpool W7 MS450 Rúra

Návod

Whirlpool WTA C 8411 SC AN Rúra

Návod

Whirlpool WOI11P8FHT2SBAF Rúra

Návod

Whirlpool WOI4IS8HM0XA Rúra

Návod

Whirlpool WOI118PT2SSMA Rúra

Návod

Whirlpool WOI4S8PPM1SB Rúra

Návod

Whirlpool W6 OS4 4S2 P BL Rúra

Návod

Whirlpool W7 OS4 4S1 H Rúra

Súvisiace kategórie