Návod Zelmer ZIR3300 Power Žehlička

Návod

13

PLEN

Dry ironing

The steam iron can be used on the dry setting with or without water in the water tank, it is best to avoid

having the water tank full while dry ironing.

Turn the variable steam control to the minimum position.

Select the setting on the temperature control dial best suited for the fabric to be ironed.

CAUTION: If the steam iron has been used for a long time, it is hot and there is no water. Do not rell it

with water until the steam iron cools down.

Shot of steam

The shot of steam feature provides additional steam for removing stubborn wrinkles.

Set the temperature control to at least the “●●” position.

Press the powerful steam button to release the burst of steam.

NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button in

continuously and wait almost 5 seconds between pressures.

Vertical ironing

Set the temperature control to “max”.

By pressing the shot-steam button at intervals you can also iron vertically (curtains, hung garments, etc.)

NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button in

continuously and wait almost 5 seconds between pressures.

When you nished ironing

Set the temperature dial to the minimum position.

Remove the main plug from the wall socket.

Stand the iron on heel rest.

MANITENANCE AND CLEANING

It is recommended to do the self-cleaning every two weeks if the water in the area is hard or semi-hard if

frequent use of the device is made

Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled

down.

Do not use abrasive cleaners.

To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as

these will damage the surface.

Cleaning the soleplate; Do not use scouring pads or harsh cleaners on the soleplate as these will

damage the surface. To remove burnt residue, iron over a damp cloth while iron is still hot. To clean the

soleplate, simply wipe with soft damp cloth and wipe dry.

Self-cleaning

1. Unplug the iron from the mains socket

2. Set the steam regulator to the

position.

3. Fill the water reservoir.

4. Set the temperature control to its maximum position.

5. Insert the main plug into the wall socket.

6. Allow the iron to heat up until the indicator light turns off.

7. Unplug the steam iron (very important!)

8. Hold the iron over a sink. Press the “clean” button and shake the iron until approximately one third of

the water capacity of the tank is evaporated. Boiling water and steam will be ejected from the holes in

soleplate with impurities washed out

9. Release the “clean” button, and gently shake the iron for some seconds.

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Zelmer ZIR3300 Power Žehlička papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Zelmer. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Zelmer ZIR3300 Power Žehlička v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Zelmer Žehličky
Ďalšie príručky od Žehličky

Často kladené otázky o Zelmer ZIR3300 Power Žehlička

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Zelmer ZIS2415 Active Žehlička

Návod

Zelmer 28Z020 Navigator Fine Žehlička

Návod

Zelmer 28Z025 Navigator Supreme Žehlička

Návod

Zelmer IR8100 Žehlička

Návod

Zelmer IR2200 Front Jetix R Žehlička

Návod

Zelmer ZIR2620 GoldenGlide Žehlička

Návod

Zelmer ZIR1505 Žehlička

Návod

Zelmer ZIS6450 Smartcare Žehlička

Súvisiace kategórie