Návod FERM ETM1003 Sponkovačka

Návod

EN

4

 Always assume that the tool contains

fasteners. Careless handling of the tacker can

result in unexpected firing of fasteners and

personal injury.

 Do not point the tool towards yourself or

anyone nearby. Unexpected triggering will

discharge the fastener causing an injury.

 Do not actuate the tool unless the tool is

placed firmly against the workpiece. If the tool

is not in contact with the workpiece, the

fastener may be deflected away from your

target.

 Disconnect the tool from the power source

when the fastener jams in the tool. While

removing a jammed fastener, the tacker may

be accidentally activated if it is plugged in.

 Do not use this tacker for fastening electrical

cables. It is not designed for electric cable

installation and may damage the insulation of

electric cables thereby causing electric shock

or fire hazards.

Before using the tacker

 Check the following points:

• Do the voltage of the engine and the

engine safe-guard, if any, correspond to

the mains voltage (appliances for a mains

voltage of 220-240 V);

• Are the mains lead and the mains plug in

a good condition: solid, without any loose

ends or damage.

 Always wear eye protection when using the

tool.

 Maintain the tool with care.

 Check for misalignment or binding of moving

parts, breakage of parts, and any other

condition that may affect the tools operation. If

damaged, have the tool serviced before

using.

 Check if the slide cartridge has been fastened

properly.

 Do not use the tool in a humid environment.

 Do not use the tool on materials containing

asbestos.



 Do not use the tool if the switch does not turn

it “ON” or “OFF”.

 Always hold the tool with two hands while

starting.

 Always keep the cord away from the moving

parts of the machine.

 Keep your hands away from the work piece.

 In the case of jamming by a nail or staple,

switch the machine off immediately and

remove the plug from the mains.

 Never aim the tool at people or animals.

 Use only staples or nails fit for this tool.

 Make sure not to damage any leads when

using the tool.





When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Class ll machine. Your machine is double

insulated; therefore no earthwire is

required.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm

2

. When using a cable

reel always unwind the reel completely.





Fig. 2

For this tool, use one of the following types

staples or nails:

 U: 6, 8, 10, 12, 13 or 14 mm

 T: 15 mm

 I: 15 mm

Suitable staples and nails are provided by:



Rapid: R11, R54, R14, R34, R114, R64

Piranha: 5, 13

Novus

www.servotool.eu



Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu FERM ETM1003 Sponkovačka papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať FERM. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu FERM ETM1003 Sponkovačka v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre FERM Sponkovačky
Ďalšie príručky od Sponkovačky

Často kladené otázky o FERM ETM1003 Sponkovačka

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

FERM ETM1004 Sponkovačka

Návod

Parkside IAN 273474 Sponkovačka

Návod

Parkside IAN 322765 Sponkovačka

Návod

Parkside IAN 64571 Sponkovačka

Návod

My Project J-118 Sponkovačka

Návod

Extol 420101 Sponkovačka

Návod

Bostitch 21671B-A-E Sponkovačka

Návod

Bosch PTK 3.6 LI Sponkovačka

Súvisiace kategórie