Návod FERM ETM1003 Sponkovačka

Návod

EN

5

Before opening the tool, make sure the

tool is disconnected.



Fig. 3 - 5

Unlocking slide

 Press the slide unlock (2) on both sides to

unlock the slide.

Placing staples

 Pull the slide out of the machine

 Place the staples or nails in the cartridge

Placing nails

 Push the slide back in the machine.

 Lock the slide by sliding the slide forward until

it locks into place.

Using the tacker

 Press the On/Off switch (5) to switch the

machine on

 Press the On/Off switch (5) to switch the

machine off.

Placing the tool

 Place the tool at the spot where the staple or

nail should be located.

 Press the tool down firmly.

Pressing safety catch

 Press the safety catch to the side to unlock

the safety.

Stapling

 Press the switch.

 When the work is completed, slide the safety

catch to the other side to lock the safety back

on.

The tool will cause a re bound because of

the force it operates with. Keep this in

mind.



Make sure that the machine is not live

when carrying out maintenance work on

the motor.

This machine has been designed to operate

over a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.



Should the machine fail to function correctly, a

number of possible causes and the appropriate

solutions are given below:

 In case a staple or nail is jammed in the tool,

follow the procedure below

• Disconnect the tool.

• Carefully remove the staple or nail from

the tool with a thin object (for example a

knife).

Repairs and servicing should only be

carried out by a qualified technician or

service firm.



Regularly clean the device’s casing with a soft

cloth, preferably after each use. Keep the fan slits

free of dust and dirt. Remove stubborn dirt using

a soft cloth, dampened with soapy water. Do not

use solvents such as benzene, alcohol, ammonia,

etc., which might damage the plastic parts.



If a defect appears due to a part wearing out,

please contact the service center on the warranty

card. At the end of these instructions there is

an exhaustive overview of the parts that can be

ordered.



To prevent damage during transport, the

appliance is delivered in a solid packaging which

consists largely of reusable material. Therefore

please make use of options for recycling the

packaging.

Damaged and/or disposed of electrical or

electronic devices must be dropped off at

recycling stations intended for that

purpose.



Do not dispose of power tools into domestic

waste. According to the European Guideline

2012/19/EU for Waste Electrical and Electronic

Equipment and its implementation into national

right, power tools that are no longer usable must

be collected separately and disposed of in an

environmentally friendly way.

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu FERM ETM1003 Sponkovačka papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať FERM. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu FERM ETM1003 Sponkovačka v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre FERM Sponkovačky
Ďalšie príručky od Sponkovačky

Často kladené otázky o FERM ETM1003 Sponkovačka

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

FERM ETM1004 Sponkovačka

Návod

Parkside IAN 273474 Sponkovačka

Návod

Parkside IAN 322765 Sponkovačka

Návod

Parkside IAN 64571 Sponkovačka

Návod

My Project J-118 Sponkovačka

Návod

Extol 420101 Sponkovačka

Návod

Bostitch 21671B-A-E Sponkovačka

Návod

Bosch PTK 3.6 LI Sponkovačka

Súvisiace kategórie