Návod Hama 00221053 Diaľkový ovládač

Návod

4

5.1.3 Use the device button to select the devicetobe

operated (e.g. TV). If the selection is successful, theLED

flashes once and then lights up permanently.

5.1.4 Search the code list forthe brandand type of the device

to beoperated.

5.1.5 Enter the corresponding five-digit code using the

number buttons 0-9. The LED confirms the entry of each

digit with ashort flash and goes out after the fifthdigit.

5.1.6 Then test the remote control and check whether the

desired functions can be controlled. It ispossible that

the first code is not the most suitable, andpossibly not

all functions are available. In this case, trythe next code

mentionedfor the selected device type/brandfromthe list.

Note

• Avalid code is automatically saved.

• If the code is invalid, the LED ashes six times and then

goes out. Repeat steps 5.1.1 to 5.1.5, or use another

method to enter the code.

5.2 Manual code search

The universal remote control has an internal memory that

already contains up to 350 codes per device type for themost

common AV devices. Youcan go through these codes until

the device to be operated shows aresponse.For example, the

device to be operated switches off ("Power (19)

"key) or

changes channel ("P+/P-" key).

5.2.1 Switch the device you wish to operate on.

5.2.2 Press the "

Setup (11)

"

button until the LED lights up

permanently.

5.2.3 Use the device button to select the device to be operated

(e.g. TV). If the selection is successful, the LED flashes

once andthenlights up permanently.

5.2.4 Pressthe "Power (19)

"or"P+/P-"key to scroll

through the preset codes until thedevice to be operated

shows aresponse.

5.2.5 Press "OK (16)" to save the code andexit the code

search. The LED goes out.

5.2.6 Then test the remote control andcheck whether the

desired functions can be controlled. It is possible that the

first code foundisnot themost suitable, and possibly

not all functions are available. In this case, repeatsteps

5.2.1.–5.2.5. The code search starts with the next code

following the last one saved.

Note

Amaximum of 350 codes of themostcommon devices can

be stored inthe internal memory.Due to the numerous AV

devices available on the market,itmay happen that only the

most common main functions areavailable. If this is thecase,

repeat steps 5.2.1 to 5.2.5 to nd amorecompatible code. A

code may not be available forsome specicdevice models.

5.3 Automatic code search

The automatic code search uses the same preset codes as

the manual code search (5.2). However,the universal remote

control automatically searches the codes until the device to

be operated shows aresponse. Forexample, the device to be

operated switches off("

Power (19)

"key) or changes channel

("P+/P-" keys).

5.3.1Switch thedeviceyou wish to operate on.

5.3.2 Pressthe "SETUP" button until the LED lights up

continuously.

5.3.3 Use the devicebutton to selectthe devicetobeoperated

(e.g. TV). If the selection is successful, the LED flashes

once and then lights up permanently.

5.3.4 Press the "P+/P-" or "

Power (19)

"key to start the

automatic code search. The LED flashes once and then

lights up permanently. It takes 6seconds for the universal

remote control to start the first search.

Note: Setting the search speed

• The default setting for the search time per code is 1

second. If thisdoes not suit you, you can change to a

search time of 3seconds per code. To switch between

searchtimes, press "P+" or "P-" within the 6seconds

beforethe automatic code search starts.

5.3.5 The LED confirms the respectivecode searches with a

single flash.

5.3.6 As soon as the device to be operated shows aresponse,

press the "

OK (16)

"button to save the code and exit the

code search. The LED goes out.

5.3.7 Then test the remote control and check whether the

desired functions can be controlled. It is possible that the

first code found is not the most suitable, and possibly

not all functions are available. In this case, repeat steps

5.3.1.–5.3.6.The code search starts with the next code

following the last one saved.

5.3.8 Tocancel the automatic search during the search process,

press the "Back (14)

"key.

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Hama 00221053 Diaľkový ovládač papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Hama. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Hama 00221053 Diaľkový ovládač v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Hama Diaľkové ovládače
Ďalšie príručky od Diaľkové ovládače

Často kladené otázky o Hama 00221053 Diaľkový ovládač

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Hama 00012306 4in1 Diaľkový ovládač

Návod

Hama 00221050 Nano Diaľkový ovládač

Návod

Hama 00221061 LG Diaľkový ovládač

Návod

Hama 00221058 Samsung Diaľkový ovládač

Návod

Hama 00221065 Grundig Diaľkový ovládač

Návod

Hama 00040074 6in1 Diaľkový ovládač

Návod

Hama 00221057 8in1 Diaľkový ovládač

Návod

Hama 00221055 Diaľkový ovládač

Súvisiace kategórie