Návod Hama 00221053 Diaľkový ovládač

Návod

6

7.1 Before you start the learning function

• Make surethat allbatteries used in both remotecontrols are

in perfect condition. Change them if necessary.

• Place your original remote control and the universal remote

control next to each othersothat the infrared diodes of the

remote controls aredirectly oppositeeach other.

• If necessary, correct the height of both remote controls to

achieve optimal alignment.

• The distance between the tworemotecontrols should be

approx. 3cm.

ca. 3cm

ORIGINAL

Note

• Do not movethe remote controls during the learning

process.

• Make surethat the room lighting is not uorescent tubes

or energy-saving lamps, as these could cause interference

and thus hinder the learning process.

• The distance betweenthe two remote controls andthe

nearest light source should be at least 1metre.

• The learning process is terminated without saving if no

button is pressed or no signal is received for 30 sec.while

learning mode is activated.

• In learning mode, each button can only be assigned one

function. Anew function overwrites the function previously

taught on this button.

• The device selection buttons (2) andthe “Setup(11)

“

button (11) cannot be assignednew functions.

7.2 Activating the learning mode

1. Press and hold the [Mute (1)

]and [V+] buttons si-

multaneously for approx. 3sec. until the status LED lights

up continuously.

MUTE V+

2. Enter the code [9] [8] [0], the status LED ashes2times

andthenlightsuppermanently.

3. The universal remote control is nowinlearning mode.

7.3 Transferring thebutton function

1. Press the button on the original remotecontrol whose

function you want to transfer.Toconrm that the com-

mandhas been received, the status LED of the universal

remote control ashes.

2.

Now press the button onthe universal remotecontrolto

which the function is to be transferred.

3. The function LED of the universal remote control ashes

3times for conrmation and then lights up permanently

again. The new function is now saved.

4. To transfer the functions of additional buttons, repeat

these steps.

5. Press the [SETUP] button to save alltaught-in functions

and exit the learning mode.

Note

When changing the batteries of the universal remote

control, the functions of the taught-in buttons areretained.

7.4 Deletingtaught functions

7.4.1 Deleting ataught function

1. Press and hold the [Mute (1)

]and [V+] buttons si-

multaneously forapprox. 3sec. until the status LED lights

up continuously.

MUTE V+

2.

Enter the code [9] [8] [1], the status LED ashes2times

and then lights up permanently again.

3. Press the buttonwhose function youwish to

want to delete. The statusLED ashes 3times and the

desired functionisdeleted.

7.4.2 Deleting all taught functions

1. Press and hold the [Mute (1)

]and [V+] buttons si-

multaneously forapprox. 3sec. until the status LED lights

up continuously.

MUTE V+

2.

Enter the code [9] [8] [2], the status LED ashes2times

and then lights up permanently again.

3. Press the [Setup (11)

]button, the statusLED ashes 3

times and alltaught-in functions aredeleted.

8. Restoring factory settings

1. Press and hold the “Setup(11)

"” button for approx. 3

seconds until the LED lights up.

2. Press the "

Mute (1)

"" button. The LED ashes once

and then lights up permanently.

3. Press the number key 0. The LED ashes fourtimes. The

remotecontrol is now reset to the factory settings.

Note

Alltaught-in or copied buttons as wellasall settings of the

remotecontrolwillbedeleted.

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Hama 00221053 Diaľkový ovládač papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Hama. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Hama 00221053 Diaľkový ovládač v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Hama Diaľkové ovládače
Ďalšie príručky od Diaľkové ovládače

Často kladené otázky o Hama 00221053 Diaľkový ovládač

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Hama 00012306 4in1 Diaľkový ovládač

Návod

Hama 00221050 Nano Diaľkový ovládač

Návod

Hama 00221061 LG Diaľkový ovládač

Návod

Hama 00221058 Samsung Diaľkový ovládač

Návod

Hama 00221065 Grundig Diaľkový ovládač

Návod

Hama 00040074 6in1 Diaľkový ovládač

Návod

Hama 00221057 8in1 Diaľkový ovládač

Návod

Hama 00221055 Diaľkový ovládač

Súvisiace kategórie