Návod Indesit DF9E 1B10 Umývačka riadu

Návod

ENQuick Guide

1

THANK YOU FOR BUYING AN INDESIT PRODUCT.

In order to receive a more complete assistance, please register

your appliance on: www.indesit.com/register

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on

the machine’s functional components.

• It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher (see PROD-

UCT DESCRIPTION) and must be lled when the green oat on the cap of

the salt reservoir is no longer visible.

1. Remove the lower rack and unscrew the reservoir cap

(anticlockwise).

2. Only the rst time you do this: ll the salt reservoir

with water.

3. Position the funnel (see gure) and ll the salt reservoir

right up to its edge (approximately 1 kg); it is not unu-

sual for a little water to leak out.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into

the container during the wash program (this could damage the water sof-

tener beyond repair).

Whenever you need to add salt, it is mandatory to complete the pro-

cedure before the beginning of the washing cycle to avoid corrosion.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dis-

penser A should be lled when when the dark optical

indicator on the dispenser door C becomes transparent.

NEVER pour the rinse aid directly into the appliance

tub.

D

E

A

C

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device D. Introduce the

detergent into the dry dispenser E only. Place the amount of detergent for

pre-washing directly inside the tub.

Usage of detergent not designed for dishwashers may cause malfunc-

tion or damage to the appliance.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently prevent-

ing scale buildup on heater, contributing also to better cleaning eciency.

This system regenerates itself with salt, therefore it is required to rell

salt container when empty.

Frequency of regeneration depends on water hardness level setting - regen-

eration takes place once per 5 Eco cycles with water hardness level set to 3.

Regeneration process starts in nal rinse and nishes in drying phase, be-

fore cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

CONTROL PANEL

FIRST TIME USE

Before using the appliance carefully read Safety Instructions

guide.

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Note for Test Laboratories: For information on

comparative EN testing conditions, please send an email to the following address: dw_test_suppor[email protected]

Pre-treatment of the dishes is not needed before any of the programs.

*) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and

pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-

bration. The sensor calibration can increase program duration up to 20 min.

PROGRAMS TABLE

1. On-O/Reset button with indicator light

2. Program selection knob

3. Start/Pause button with indicator light / Drain out

PLEASE SCAN THE QR CODE ON YOUR

APPLIANCE IN ORDER TO HAVE MORE

DETAILED INFORMATION

Program Programs description

Drying

phase

Duration

of wash

program

(h:min)

*)

Water

consumption

(litres/cycle)

Energy

consumption

(kWh/cycle)

1.

Eco 50°- Eco program is suitable to clean normally soiled tableware, that for this use, it

is the most ecient program in terms of its combined energy and water consumption,

and that it is used to assess compliance with the EU Ecodesign legislation.

4:00 11.5 0.78

2.

Intensive 65° - Program recommended for heavily soiled crockery, especially suita-

ble for pans and saucepans (not to be used for delicate items).

2:30 15.0 1.50

3.

Mixed 55° - Mixed soil. For normally soiled dishes with dried food residues.

2:25 15.0 1.35

4.

Rapid 40’ 45° - Program to be used for half load of lightly-soiled dishes with no dried

food residues. Does not have drying phase.

-

0:40 8.0 0.90

5.

Half Load 50°- Ideal for washing ahalf load of lightly or normally soiled crockery.

1:15 11.0 0.90

6.

Pre-Wash - Use to refresh crockery planned to be washed later. No detergent to be

used with this program.

-

0:10 4.0 0.01

2 3

1

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Indesit DF9E 1B10 Umývačka riadu papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Indesit. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Indesit DF9E 1B10 Umývačka riadu v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Indesit Umývačky riadu
Ďalšie príručky od Umývačky riadu

Často kladené otázky o Indesit DF9E 1B10 Umývačka riadu

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Indesit DIC 3C24 A Umývačka riadu

Návod

Indesit TDFP 57BP96 EU Umývačka riadu

Návod

Indesit DSR 57T94 CA S EU Umývačka riadu

Návod

Indesit DISR 16M19 A EU Umývačka riadu

Návod

Indesit DSFE 1B10 Umývačka riadu

Návod

Indesit DIFP 8T94 Z Umývačka riadu

Návod

Indesit DIFP 28T9 A EU Umývačka riadu

Návod

Indesit IDL 600 S EU.2 Umývačka riadu

Súvisiace kategórie