Návod Whirlpool FFB 8489 BV EE Práčka

Návod

Temperature

Every programme has a predened temperature. If you want to change

the temperature, press the “Temperature” button. The value appears on

the display.

Spin

Every programme has a predened spin speed. If you want to change the

spin speed, press the “Spin” button. The value appears on the display.

Demo mode

To deactivate this function, switch the washing machine OFF. Than press

and hold “Start/Pause” button, within 5 seconds press also

“ON/OFF” button and hold both buttons for 2 seconds.

KEY LOCK

To lock the control panel, press and hold the “Key lock” button

for approximately 3 seconds. The symbol will light up on the

display to indicate that the control panel has been locked (with the

exception of the “ON/OFF“ button). This prevents unintentional

changes to programmes, especially with children near the machine. To

unlock the control panel, press and hold the “Key lock” button for

approximately 3 seconds .

BLEACHING

If you wish to bleach the laundry, load the washing machine and set the

“Rinse & Spin” programme.

Start the machine and wait for it to complete the rst water lling cycle

(roughly 2 minutes). Put the machine in pause mode by pressing the

“Start/Pause” button, open the detergent drawer and pour the bleach

(observe the recommended doses indicated on the package) into the

main wash compartment where the partition was previously mounted.

Restart the cycle by pressing the “Start/Pause” button.

If desired, it is possible to add fabric softener into the appropriate

compartment of the detergent drawer.

HINTS AND TIPS

Sort your laundry according to

Type of fabric/care label (cotton, mixed bres, synthetics, wool, handwash

items). Colour (separate coloured and white items, wash new coloured

items separately). Delicates (wash small items – like nylon stockings – and

items with hooks – like bras – in a cloth bag or pillow case with zip).

Empty all pockets

Objects like coins or lighters can damage your laundry as well as the

drum.

Follow the dosage recommendation / additives

It optimizes the cleaning result, it avoids irritating residues of surplus

detergent in your laundry and it saves money by avoiding waste of

surplus detergent

Use low temperature and longer duration

The most ecient programmes in terms of energy consumption are

generally those that perform at lower temperatures and longer duration.

Observe the load sizes

Load your washing machine up to the capacity indicated in the

“PROGRAMME CHART” table to save water and energy.

Noise and remaining moisture content

They are inuenced by the spinning speed: the higher the spinning

speed in the spinning phase, the higher the noise and the lower the

remaining moisture content.

CYCLE COUNTER

The cycle counter on your appliance allows you to track the total

number of cycles it has performed. This feature is useful for monitoring

usage and maintenance.

To access the cycle counter:

1. Press the “ON/OFF” button to turn on the appliance.

2. Press the “ON/OFF” button again to turn o the appliance.

3. Press and hold the Temperature button for approximately 5 seconds.

The display will show the total number of cycles performed by the

appliance. If the number of cycles is between 0 and 999, the display will

show a xed number. If the number of cycles is higher, the numbers will

scroll on the display (e.g. 1_379).

To exit the cycle counter mode, press any button.

Note: The washer may have already performed a set of cycles due to

an extended quality process carried out during production to ensure

higher product quality.

CLEANING & MAINTENANCE

For any cleaning and maintenance, switch o and unplug the washing

machine. Do not use ammable uids to clean the washing machine.

Clean and maintain your washing machine periodically (at least 4 times

per year).

Cleaning the outside of the washing machine

Use a soft damp cloth to clean the outer parts of the washing machine.

Do not use glass or general purpose cleaners, scouring powder or similar

to clean the control panel – these substances might damage the printing.

Checking the water supply hose

Check the inlet hose regularly for brittleness and cracks. If damaged,

replace it by a new hose available through our After-Sales Service or

your specialist dealer. Depending on the hose type: If the inlet hose has

a transparent coating, periodically check if the colour intensies locally. If

yes, the hose may have a leak and should be replaced

Cleaning the water lter / draining residual water

If you used a hot wash programme, wait until the water has cooled down

before draining any water. Clean the water lter regularly, to avoid that

the water cannot drain after the wash due to obstruction of the lter. If

the water cannot drain, the display indicates that the water lter may be

clogged.

Remove the plinth by using the screwdriver: push downwards one side

of the plinth with your hand, then push the screwdriver into the gap

between plinth and front panel and pry open the plinth. Place a broad,

at container beneath the water lter, to collect the drain water. Slowly

turn the lter counterclockwise until water ows out. Let the water ow

out, without removing the lter. When the container is full, close the

water lter by turning it in clockwise. Empty the container. Repeat this

procedure until all the water has drained. Lay a cotton cloth beneath

the water lter, which can absorb a small amount of rest water. Then

remove the water lter by turning it out anti clockwise. Clean the water

lter: remove residues in the lter and clean it under running water.

Insert the water lter and reinstall the plinth: Reinsert the water lter

again by turning it in clockwise direction. Make sure to turn it in as far

as it goes; the lter handle must be in vertical position. To test water

tightness of the water lter, you can pour about 1 liter of water into the

detergent dispenser. Then reinstall the plinth.

ACCESSORIES

Contact our After-Sales Service to check if the following accessories are

available for your washing machine model.

Stacking kit shelf

By which your dryer can be xed on top of your washing machine to save

space and to facilitate loading and unloading your dryer in the higher

position.

TRANSPORT AND HANDLING

Never lift the washing machine by holding it at the worktop.

Pull out the mains plug, and close the water tap. Make sure that door

and detergent dispenser are properly closed. Disconnect the inlet hose

from the water tap, and remove the drain hose from your draining point.

Remove all rest water from the hoses, and x them so that they cannot

get damaged during transport. Ret the transport bolts. Follow the

instructions for removing the transport bolts in the INSTALATION GUIDE

in reverse order.

EN

Quick guide

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Whirlpool FFB 8489 BV EE Práčka papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Whirlpool. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Whirlpool FFB 8489 BV EE Práčka v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Whirlpool Práčky
Ďalšie príručky od Práčky

Často kladené otázky o Whirlpool FFB 8489 BV EE Práčka

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Whirlpool TDLRB 6251BS EU Práčka

Návod

Whirlpool FFB 8469 WV EE Práčka

Návod

Whirlpool W6 98 SILENCE EE Práčka

Návod

Whirlpool FFB 7469 BV EE Práčka

Návod

Whirlpool TDLR 55130S EU Práčka

Návod

Whirlpool FFS 7259 B EE Práčka

Návod

Whirlpool WH7IPA15BM6L0 Práčka

Návod

Whirlpool BI WMWG 81485E EU Práčka

Súvisiace kategórie