Návod AEG EXE 460 Excentrická brúska

Návod

5

.........................460 W

............8000-11000 min

-1

.............................7 mm

................ 125/150* mm

..........................2,3 kg

.......................< 2,5 m/s

2

...........................82 dB (A)

ENGLISH

TECHNICAL DATA

Nominal power output ...........................................................

No load oscillation frequency ................................................

Orbital travel diameter ...........................................................

Dimensions of grinding plate* ................................................

Weight without cable .............................................................

Typical weighted acceleration in the hand-arm area .............

Typical A-weighted sound levels:

Sound pressure level ..........................................................

The noise level when working can exceed 85 dB (A).

Wear ear protectors!

Measured values determined according to EN 50 144.

*Depending on equipment

SAFETY INSTRUCTIONS

Please pay attention to the safety instructions in the

attached leaflet!

Appliances used at many different locations including open

air must be connected via a current surge preventing switch.

Always wear goggles when using the machine. It is

recommended to wear gloves, sturdy non slipping shoes

and apron.

Always disconnect the plug from the socket before carrying

out any work on the machine.

Only plug-in when machine is switched off.

Keep mains lead clear from working range of the machine.

Always lead the cable away behind you.

Before use check machine, cable, and plug for any

damages or material fatigue. Repairs should only be carried

out by authorised Service Agents.

Dust that arises when working in wood or using the tool on

material can be dangerous to health. In this case connect

the tool to a suction device.

Do not use machines on any material containing asbestos.

This machine is suitable only for dry sanding.

SPECIFIED CONDITIONS OF USE

This eccentric sander is a versatile machine. The following

work can be carried out with it: Coarse sanding and

grinding, Fine sanding and polishing, Rubbing down

weather-beaten paint, Rubbing down weather-beaten paint,

Polishing up scratches on acrylic glass, Etc.

Do not use this product in any other way as stated for

normal use.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is

in conformity with the following standards or standardized

documents. EN 50144, EN 55014-1, EN 55014-2,

EN 61000-3-2, EN 61000-3-3, in accordance with the

regulations 98/37/EC, 89/336/EEC

Rainer Warnicki

Manager Product Marketing

and Development

MAINS CONNECTION

Connect only to single-phase a.c. current and only to the

system voltage indicated on the rating plate. It is also

possible to connect to sockets without an earthing contact

as the design conforms to safety class II.

ADVICE FOR OPERATION

Only use original AEG sanding and polishing tools with self-

adhesive velcro fastening.

The sleeve has at the same time the effect of a disk break.

If the effect of the break diminishes (uncontrolled uprising of

the disk brake) change the sleeve.

MAINTENANCE

The ventilation slots of the machine must be kept clear at all

times.

Use only AEG accessories and spare parts. Should

components need to be replaced which have not been

described, please contact one of our service agents (see

our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered.

Please state the Article No. as well as the machine type

printed on the label and order the drawing at your local

service agents or directly at: Atlas Copco Electric Tools

GmbH, Postfach 320, D-71361 Winnenden.

SYMBOLS

Always disconnect the plug from the socket

before carrying out any work on the

machine.

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu AEG EXE 460 Excentrická brúska papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať AEG. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu AEG EXE 460 Excentrická brúska v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre AEG Excentrické brúsky
Ďalšie príručky od Excentrické brúsky

Často kladené otázky o AEG EXE 460 Excentrická brúska

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

AEG BEX 18-125 Excentrická brúska

Návod

AEG EX 150 ES Excentrická brúska

Návod

AEG EX 125 E Excentrická brúska

Návod

AEG EX 150 E Excentrická brúska

Návod

AEG EX 125 ES Excentrická brúska

Návod

Ryobi RROS18-0 Excentrická brúska

Návod

Parkside IAN 56848 Excentrická brúska

Návod

Einhell TC-RS 425 E Excentrická brúska

Súvisiace kategórie