Návod Vivanco UR 14 Diaľkový ovládač

Návod

UR 14 UNIVERSAL CONTROLLER

Vivanco GmbH, D-22926 Ahrensburg, E-Mail

: [email protected]

, Helpline: +49 (0) 4102 231135

2

(GB) Instructions

VIVANCO UR 14 remote control for almost

all TV, audio, video and other infrared-

controllable appliances

Inserting the batteries

Open the battery compartment on the

underside of the UR, see Fig.. Then insert 1

new CR 2032 lithium battery. Make sure that

the polarity is correct: the "+" and "-" markings

on the batteries and in the compartment must

match. To check functionality, press the PWR

button. If everything is correct the red lamp

flickers when the button is pressed.

Lithium Battery:

Caution: Danger of explosion if battery is

incorrectly replaced. Replace only with the

same or equivalent type recommended by the

manufacturer. Dispose of used batteries

according to the manufacturer’s instructions.

Adapting to appliances

In order to control your appliances you must

adapt or set the remote control to them. There

are three ways of doing so: direct control code

entry, code search or learn.

Direct control code entry using the

enclosed list

Example: setting to control a Panasonic

television set:

1. The attached list gives, for

example, the Panasonic Code 176.

Please make sure you have selected the

correct list for television sets (TV).

2. To prepare code entry, press the

SET button, keep it pressed and then press the

required appliance button, e.g. TV1*),

additionally until the lamp (LED) lights

constantly.

3. Then press the number buttons

(e.g. 1 7 6) in sequence.

4. Once the numbers have been

entered the lamp goes out and the remote

control is ready to control your appliance.

5. Finally, test the control code setting

by trying to control (in this example) your

television set. If it does not work at all or not

correctly try a different code from the list or the

code search (see below).

6.

To set the remote control for other

appliances, proceed in the same way. Instead

of the TV appliance button, press another

button e.g. VCR, DVB (SAT, DECODER),

DVD).

The letters on the device buttons TV1/TV2*),

CD/AUX1*), DVB1/DVB2*) SAT1/SAT2*),

TV3/TUNER*), CBL, AMP, DVD1/DVD2*) are

for your orientation only. You can set each type

of device under any of the buttons.

*): All *) marked device keys can be assigned

twice so that 14 different devices can be

controlled altogether. If you press a key once

according to these instructions, you can enter a

device code for the first assignment or control

the first device. If you press a device key twice

within 0,5 seconds you can set the key for a

second device, or control a second device by

the key.

You can terminate the mode by pressing any

device button.

Code search

If the brand of your appliance is not in the list

or none of the codes given fits, we recommend

a code search.

Manual code search

1. Switch on the appliance to be

controlled. Program is running.

2. To prepare code search, press the

SET button, keep it pressed and then press the

required appliance button, e.g. TV1*),

additionally until the lamp (LED) lights

constantly.

3. Then point the remote control at the

appliance to be controlled.

4. Briefly press the SET button once.

The lamp (LED) blinks. – Except when

searching for a TV code you can also briefly

press the (Play) button and use the Play

function to help search and press ON/OFF

for testing the next code. Make sure that a

tape, a DVD or a CD is inserted in the tape

deck, player or recorder.

5. Press the ON/OFF (appliance

on/off) button repeatedly for testing the next

code, approx. every 1,5 seconds, until the

appliance, e.g. your TV reacts by power off or

your DVD player, reacts by Play > button. - If

your appliance has switched itself off you must

switch it back on again, e.g. on the appliance

or with the original remote control, to continue

searching. - When your appliance reacts you

can also try out other buttons without

interrupting the search. If some buttons do not

work properly, simply continue searching with

ON/OFF or Play.

6. When your appliance reacts

correctly, press the appliance button, e.g.

TV1*), and end the search. The lamp (LED)

goes out.

- The UR 14 continues with the search at the

point where you interrupted it. . The code last

Hodnotenie

Viac o tomto návode

Chápeme, že je pekné mať k svojmu Vivanco UR 14 Diaľkový ovládač papierovú príručku. Návod si môžete kedykoľvek stiahnuť z našej webovej stránky a vytlačiť si ho sami. Ak chcete mať originálnu príručku, odporúčame vám kontaktovať Vivanco. Mohli by byť schopní poskytnúť originálny návod. Hľadáte príručku k svojmu Vivanco UR 14 Diaľkový ovládač v inom jazyku? Vyberte si preferovaný jazyk na našej domovskej stránke a vyhľadajte číslo modelu, aby ste zistili, či ho máme k dispozícii.

Technické údaje

Všetky príručky pre Vivanco Diaľkové ovládače
Ďalšie príručky od Diaľkové ovládače

Často kladené otázky o Vivanco UR 14 Diaľkový ovládač

Náš tím podpory vyhľadáva užitočné informácie o výrobkoch a odpovede na často kladené otázky. Ak nájdete v našich často kladených otázkach nejakú nezrovnalosť, dajte nám o tom vedieť pomocou nášho kontaktného formulára.

Súvisiace produkty

Návod

Vivanco UR Zap 2 Diaľkový ovládač

Návod

Vivanco UR 2 Diaľkový ovládač

Návod

Vivanco UR 03 UF Diaľkový ovládač

Návod

Vivanco UR 81 Diaľkový ovládač

Návod

Vivanco UR 82 SE Diaľkový ovládač

Návod

Vivanco UR 4 SL Diaľkový ovládač

Návod

Vivanco UR 40 USB Diaľkový ovládač

Návod

Philips SRU1010 Diaľkový ovládač

Súvisiace kategórie